.png)
- Out-of-Stock
Micro 182 Light Aircraft 550mm w/2.4ghz Radio (Mode 2) Charger, Lipo (RTF)
ID: 222667
HK Micro 182 Light Aircraft 550mm w/2.4ghz Radio (Mode 2) Charger, Lipo (RTF) (22408)
Micro 182 Light Aircraft 550mm w/2.4ghz Radio (Mode 2) Charger, Lipo (RTF) (22408)
This great looking little "ready to fly" 182 has everything you need to fly in one box, the model has all electronics pre-installed, leaving you to simply attach the wing, push on the prop and plug in the under-carriage, in fact it is so fast to assemble, you will have time for a quick coffee before your maiden flight while the supplied battery is charging off the supplied charger.
The pre-installed reciever is pre-bound to the supplied 2.4ghz radio making life even easier, the transmitter features both trim buttons and dual rates, perfect new pilots or for switching between indoor and maybe outdoor flying where you can use the extra room, especially as this model does not lack power courtesy of it's 2s set up. Cheap as chips and bags of fun, this great little micro looks the part and is a breeze to fly, floating around a sports hall or a park, it's sure to provide hours of entertainment!
Features:
Ultra fast and simple assembly
All electronics pre-installed
Scale Looks
Plug In Undercarriage
2.4ghz Transmitter/Reciever for peace of Mind
Powerful 2s Power Train
Specs (Model):
3 Channel
Material: EPS
Wingspan: 550mm
Length: 360mm
Flying Weight: 70g
Motor: Brushed
Servo: Linear x 2
ESC/RX Combined Board
Includes:
2.4ghz Transmitter with trim buttons and Dual Rates
180mAh 2s Lipoly Battery
2s Balance Charger (Input DC 11.5v~13.5v) 0.5mA output
Power Supply for Balance Charger (100v~240v AC Input)
2 x Propeller
Screwdriver
Instructions
Requires:
4 x AA Dry Cell Batteries
PRODUCT ID: 300000003
Download
| Customer files | ||
| Rudder on right stick | 1222kb | |
222667
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
No product available!
No product available!
hb03w-p-000-00
Delivery date unknown
No product available!
No product available!
No product available!
Adafruit 2486 - NETduino 3 WiFi is an open source electronics platform using the .NET Micro Framework
Retired
No product available!
The Arduino M0 represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core.
Retired
No product available!
Arduino Yun Mini is a breadboard PCB developed with ATmega 32u4 MCU and QCA MIPS 24K SoC CPU operating up to 400 MHz. Qualcomm Atheros CPU supports a Linux distribution based on OpenWRT named Linino. The board has built- in WiFi, supports 20 digital input/output pins, a 16 MHz crystal oscillator, a micro USB connector, an ICSP header, two reset buttons and one user button.
Retired
No product available!
The Arduino 4 Relays Shield allows your Arduino driving high power loads that cannot be controlled directly by Arduino\'s digital pins. The Shield features four relays, each relay with 2 pole changeover contacts (NO and NC). Four LEDs indicate the on/off state of each relay. (A000110)
Retired
No product available!
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
Retired
No product available!
The Leonardo ETH is a microcontroller board based on the ATmega32U4 and the new W5500 TCP/IP Embedded Ethernet Controller (datasheet).
Retired
No product available!
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field. A000070
Retired
No product available!
The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.
Retired
No product available!
The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.
Retired
No product available!
Plastic holder that could fit all the boards with Arduino UNO size (68,6 mm x 53,4 mm). Contains 5 pieces in different colours. A000018
Delivery date unknown
No product available!
CryptoShield is a dedicated security peripheral for the Arduino. This shield adds specialized ICs that perform various cryptographic operations which will allow you to add a hardware security layer to your Arduino project. It also is a nice device for those performing embedded security research. DEV-13183
Retired
No product available!
HK Micro 182 Light Aircraft 550mm w/2.4ghz Radio (Mode 2) Charger, Lipo (RTF) (22408)