.png)
- Out-of-Stock
Teensy Prop Shield
ID: 562647
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. Features 10DoF (Degrees of Freedom) motion sensors, 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, 8MB flash memory. DEV-13995
Description
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. This shield features 10DoF (Degrees of Freedom) motion sensors, a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. This little board is about the size of the Teensy 3.2, just slightly longer to allow space for mounting holes and connections for power, speaker and LEDs.
The Teensy Prop Shield’s crowning glory is, of course, its Freescale 10DoF sensors. The board’s sensor suite comprises an FXOS8700CQ 6-axis linear accelerometer and magnetometer, an FXAS21002C 3-axis digital angular rate gyroscope and an MPL3115A2 precision pressure/altitude and temperature gauge.
That’s not all! The Teensy Prop Shield has been equipped with a slew of other features. Need an amplifier? The Teensy Prop Shield has one rated at 2W and is capable of driving 4 or 8 Ohm speakers. Additionally, the Prop Shield has 5V buffers meant to send data to Dotstar or APA102 type addressable LEDs. It also has an onboard 8MB flash memory, meant for storing sound clips and images, logging data and many other uses.
Features
- Motion Sensors – Allow motion interactive light and sound
- Audio Amplifier – Clear quality audio output to a small speaker
- Fast LED Driver – Drive APA102 / Dotstar LEDs for colorful lighting with rapid response
- Flash Memory – 8MB storage for images, sound clips and data logging
562647
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
A small module, matching the breadboard, containing a 32-bit microcontroller with ARM Cortex M7 core. PJRC TEENSY40
zł133.01
Delivery date unknown
No product available!
Other products in the same category (16)
A universal IR remote designed for NanoPi M1, powered by two AAA batteries. FriendlyELEC RC-100
Retired
No product available!
Odroid-MC1 Solo is a minicomputer with an Samsung Exynos5422 processor (ARM® Cortex ™ -A15 Quad 2.0GHz / Cortex ™ -A7 Quad 1.4GHz) which has 2 GB of RAM (LPDDR3) available. The module is dedicated to the construction of computer clusters, has a housing that allows you to connect multiple modules with each other.
Retired
No product available!
The ISM radio module in the DIP housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-868DP
Retired
No product available!
The ISM radio module in the SMD housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-868S2P
Retired
No product available!
A GFSK transceiver operating in the ISM 2400 ... 2483.5 MHz frequency range. Powered by a voltage of 1.9 ... 3.6 V, the pins are goldpin connectors. It has a built-in PCB antenna. HOPE MICROELECTRONICS RFM73-D
Retired
No product available!
A minisumo robot on a tracked chassis with Pololu 75:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3126
Retired
No product available!
Printed circuit board and programmed SNAKE electronic game system. AVT5639 A +
Retired
No product available!
AVT kit for self-assembly of SNAKE electronic game. AVT5639 B
Retired
No product available!
The assembled SNAKE electronic game. AVT5639 C
Retired
No product available!
A 12-in-1 construction set that teaches the use of solar and hydraulic energy. KSR17
Retired
No product available!
Self-assembly kit without TOBBIE robot soldering. KSR18
Retired
No product available!
10DOF module with intelligent orientation sensor BNO055 (accelerometer, gyroscope and magnetometer + microcontroller) and BMP280 pressure sensor equipped with Gravity connector. DFRobot SEN0253
Retired
No product available!
The ISM radio module in the SMD housing. It works on 433MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-433S2P
Retired
No product available!
Bluetooth Low Energy module in 5.0 standard. It has a completely integrated Bluetooth software stack and offers a shielded certified version with a built-in antenna. Microchip RN4871-I/RM128
Retired
No product available!
Assembled adjustable impulse stabilizer 0-25V 0-5A. AVT1522 C
Retired
No product available!
Surge protection strip, 5 sockets, CEE 7/7 breaker, 1.8 m long cable. Akyga AK-SP-05A
Retired
No product available!
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. Features 10DoF (Degrees of Freedom) motion sensors, 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, 8MB flash memory. DEV-13995