- Out-of-Stock
Cooling Fan XU4 Blue
ID: 562769
5906623437160
- The ODROID-XU4 includes the cooling fan by default. You might need this part when you want to replace the original cooling fan
Description
The ODROID-XU4 includes the cooling fan by default. You might need this part when you want to replace the original cooling fan.
Features
- Power : 5Volt / 120mA(max)
- Dimension : 39.5 x 40.0 x 10.0 mm
- Fan speed : 4000rpm approx.
- Cable length : 50mm approx.
- Noise Level : 23dBA approx.
- Blue anodizing surface
Note: Package includes a thermal paste tube. The thermal paste is responsible for conducting heat from the processor to the heat sink. Reassembling without applying thermal paste will cause the processor to overheat.
PWM port on ODROID-XU4 2pin header which connector is Molex 51021-0200 / 1.25mm pitch.
The fan motor speed is controlled by CPU temperature proportionally. Thermal interface material (double-side tape) is assembled.
Installation Guide:
- Step 1 : Remove the stock cooling fan
- Step 2 : Clear the surface of the CPU and cooling fan
- Step 3 : Apply the thermal paste on the CPU surface. Make sure to cover the entire surface that will mate to the cooler.
- Step 4 : Install the new cooling fan
Cautions! Minimize stress/bending to the PCB when you mount/un-mount the cooler
562769
Data sheet
- Voltage
- 5 V
- Power
- 0,6 W
- Length
- 39,5 mm
- Width
- 40mm
- Height
- 10
- Weight
- Other
- Noise level
- 23 dBA
- Air flow efficiency
- Other
- Rated current
- 120 mA
- Fan type
- Axial
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the CMWX1ZZABZ module enabling the implementation of communication in Lo-Ra networks. Arduino MKR WAN1300 ABX00017
Retired
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATSAMD21 module and SARA-U201 U-blox enabling the implementation of communication in GSM networks. Arduino MKR GSM 1400 ABX00018
Retired
No product available!
Intelligent Wi-Fi plug. It automatically controls lighting, heating and any other connected electrical appliance. Shelly Plug S
Retired
No product available!
LED lighting controller with WiFi function. It allows you to control RGB, RGBW and single-color LED strips. Supports lighting powered by 12V and 24V. Shelly RGBW2
Retired
No product available!
Double relay controlled by Wi-Fi with the function of roller shutter controller. It allows you to control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, radiators, air conditioners). Shelly 2.5
Retired
No product available!
USB WiFi adapter for Odroid minicomputers. It has a built-in 2.4GHz and 5.8GHz Dual band antenna. Compatible with Android and Linux systems. Odroid Wifi Module 5A
Retired
No product available!
Extensive signal analysis kit including the Analog Discovery 2 adapter, Analog Discovery BNC adapter, breadboards, BNC probes, cables with Minigrabber connectors and crocodile clips and necessary accessories. Digilent Ultimate Analog Discovery 2 Bundle (471-027)
Retired
No product available!
Board with nRF52840 microcontroller with Cortex M4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 and IMU LSM9DS1 module. Arduino ABX00030
Retired
No product available!
Board with nRF52840 microcontroller with CortexM4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 module and sensors - 9-axis IMU module, temperature, pressure, humidity, light, color, gestures and microphone. Arduino ABX00031
Retired
No product available!
Board with nRF52840 microcontroller with CortexM4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 module and sensors - 9-axis IMU module, temperature, pressure, humidity, light, color, gestures and microphone. Module with headers. Arduino ABX00035
Retired
No product available!
No product available!
Expansion board for STM32 Nucleo with NFC card reader based on the ST25R3916 chip. The board has an Arduino Uno R3 compatible connector and can be combined with STM32 Nucleo boards. STMicroelectronics X-NUCLEO-NFC06A1
Retired
No product available!
- NanoPi NEO 256MB v 1.3 - board with Allwinner H3 processor
- GOODRAM microSDHC 16GB class 10 memory card with adapter
- The official power supply for Raspberry Pi 5.1V 2.5A white
Retired
No product available!
Plastic case for Raspberry Pi 4B minicomputer in black color. MULTICOMP PRO ASM-1900136-21
Retired
No product available!
Plastic case for Raspberry Pi 4B minicomputer, transparent. MULTICOMP PRO ASM-1900136-01
Retired
No product available!
Plastic case for Raspberry Pi 4B minicomputer in white color. MULTICOMP PRO ASM-1900136-21
Retired
No product available!
- The ODROID-XU4 includes the cooling fan by default. You might need this part when you want to replace the original cooling fan