- Out-of-Stock
ArduCam OV5647 Camera 5Mpx with LS-40180 Fisheye M12x0.5 for Raspberry Pi
ID: 562543
OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount for Raspberry Pi 3. ArduCam B0055
Description
In order to meet the increasing need of Raspberry Pi compatible camera modules. The ArduCAM team now released a revision C add-on camera module for Raspberry Pi which is fully compatible with official one. It optimizes the optical performance than the previous Pi cameras, and give user a much clear and sharp image. Also it provides the FREX and STROBE signals which can be used for multi-camera synchronize capture with proper camera driver firmware.
It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. The camera is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system
The board itself is tiny, at around 36mm x 36mm. The highlight of our module is that the Lens is replaceable compared to official one, making it perfect for mobile or other applications where size and image quality are important. It connects to Raspberry Pi by way of a short ribbon cable. The camera is connected to the BCM2835/BCM2836 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.
The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
Features
- High-Definition video camera for Raspberry Pi Model A/B/B+ and Raspberry Pi 2
- Omnivision OV5647 sensor in a fixed-focus module with replaceable Lens
- Lens holder: M12x0.5 , CS mount or C mount
- 5MPixel sensor
- Integral IR filter
- Still picture resolution: 2592 x 1944
- Max video resolution: 1080p
- Max frame rate: 30fps
- Support FREX/ STROBE feature
- Size: 36 x 36 mm
- 15 cm flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector
562543
Data sheet
- Resolution
- 5MPx
- Interface
- MIPI CSI-2
- Sensor
- OV5647
- IR filter
- Yes
- Lens assembly
- M12x0.5
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
Flex Cable for Raspberry Pi Camera - 100mm / 4"
zł2.90
24h
Available quantity: 513
Available
Flex Cable for Raspberry Pi Camera - 200mm / 8"
zł2.90
24h
Available quantity: 230
Available
Flex Cable for Raspberry Pi Camera - 300mm / 12"
zł4.31
24h
Available quantity: 45
Available
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
zł3.03
24h
Available quantity: 42
Available
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 55
Available
Other products in the same category (16)
The MAXimator is an entry-level evaluation board with modern Altera MAX10 FPGA. The board can interface to external peripheral modules via Arduino Uno Rev 3 connectors. It also features HDMI+CEC+DCC and VGA interfaces
Retired
No product available!
The Kamami USB-Blaster is a programmer and configurator for PLD\'s manufactured by Altera. It is fully compatible with USB Blaster, then it can operate with a commercial and evaluation versions of the Altera Quartus project packet
Retired
No product available!
Very small Bluetooth 4.1 Low Energy (BLE) development board, with Nordic nRF51822 core, ARM Cortex-M0 SoC plus BLE capable of running at 16MHz with ultra low power consumption. Supports numerous different wireless devices running iOS 7/8, Android 4.3 or higher, and Windows Phone 8.1. WRL-13729
Retired
No product available!
Raspberry Pi Camera Module, Supports Night Vision
Retired
No product available!
1.5V LR20/R20 zinc-chloride battery. 2 pcs. GP13G
Retired
No product available!
High Definition sound card for Raspberry Pi 2, B + and A + computers. Designed in collaboration with Wolfson. Built-in D-class audio amplifier
Delivery date unknown
No product available!
The Arduino TIAN is based on the Atheros AR9342 connected to an Atmel Cortex® M0+ 32-bit microcontroller plus all connectivity: Ethernet, Wi-Fi, Bluetooth. A000116
Retired
No product available!
The break-out board for the Arduino 101 LGA module. Just like the YUN, it integrates an ATmega32U4 and an Atheros AR9331 with WiFi and Linino OS. A000126
Retired
No product available!
No product available!
No product available!
Wireless motion and temperature sensor (high accuracy) with built-in event memory (recorder)
Retired
No product available!
Wireless motion sensor, temperature (high accuracy) and humidity with built-in event memory (recorder)
Retired
No product available!
Wireless motion sensor, temperature and magnetic field with built-in event memory (recorder)
Retired
No product available!
Wireless sensor containing a precise accelerometer and magnetometer (electronic compass) with built-in event memory (recorder)
Retired
No product available!
Wireless sensor containing a precise accelerometer and magnetometer (electronic compass) with built-in event memory (recorder)
Retired
No product available!
Wireless motion sensor and magnetic field with built-in event memory (recorder)
Retired
No product available!
OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount for Raspberry Pi 3. ArduCam B0055