- Out-of-Stock
zł269.01
Expansion Shield X400 for Raspberry Pi B+/2B/3B
ID: 562585
A highly cost-effective audio hat which fits on the GPIO of the Raspberry Pi B+/2B/3B, uses i2S interface audio solution, supports 24-bit /192KHz high quality sound, compatible with other audio equipment via RCA lotus socket, includes a built-in high fidelity headphone amplifier, where you can plug in a 3.5mm audio jack directly. DFR0449
Description
The X400 Expansion Shield is a highly cost-effective audio hat which fits on the GPIO of the Raspberry Pi Model B+, Raspberry Pi 2 Model B and Raspberry Pi 3 Model B. It uses i2S interface audio solution and supports 24-bit /192KHz high quality sound. It is compatible with other audio equipment via RCA lotus socket. It includes a built-in high fidelity headphone amplifier, where you can plug in a 3.5mm audio jack directly.
The shield has two digital amplifier output ports, up to 2 x30w speakers can be directly connected. Use this hat to make your Raspberry Pi in to a lossless audio player or a network radio. We recommend using an OS image such as Volumio, RuneAudio, PiMusicBox etc.
Features
- Input Voltage
- 6V to 24V DC converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
- Audio
- Full-HD audio
- up to 24-bit/192kHz playback
- Class leading audio; 112db SNR, and THD of 0.0019%
- Audiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5122)
- Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
- Integrated hardware volume control - Mute can be enabled / disabled via jumper
- Built in High quality audio headphone amplifier (TI TPA6133A)
- Earphone AMP can be enabled / disabled via jumper
- Built in high quality Class-D stereo audio amplifier (TI TPA3118D2)
- Up to 2 x 20W into 4 ohm
- AMP can be enabled/disabled via jumper
- Phono/RCA connectors
- 3.5mm stereo audio jack
- Speaker terminals
- Wireless
- Built in IR sensor (38KHz)
- Misc
- Power output socket
- DIP switch to remove connection from RPi’s pin header
- Directly connected on top of the Raspberry Pi using the board GPIO header pins
- No wiring or soldering is required
- Pin mappings identical to 40-pin header of the R-Pi in order to support existing expansion boards
- Suitable for Raspberry Pi Model B+, 2 Model B and 3 Model B
- Dimensions
- 85 x 56mm (Same footprint as Raspberry Pi)
Package content
- X400 Expansion Board x1
- Nylon Spacers (M3 x 20mm) x4
- Nylon Screws (M3 x 6mm) x8
- Jumper Wires x2
Note: Raspberry Pi is not included in the box
562585
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
24h
Available quantity: 8
Available
Highly cost-effective multimedia hat compatible with the Raspberry Pi Model B+/2B/3B. Decodes and separates voices from HDMI signal, completely solving the poor quality problem with Raspberry Pi integrated sound card. DFR0450
zł238.80
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 74
Available
Other products in the same category (16)
No product available!
No product available!
Infrared thermometer module. It is characterized by high sensitivity and accuracy, low noise and low energy consumption. DFRobot SEN0093
Retired
No product available!
The Bluetooth module complies with the Bluetooth SPP specification and the Bluetooth 2.1 + EDR standard. Powered by 3.3/5V.
Retired
No product available!
UART GPS Module, NEO-7M-C is a module containing the U-blox NEO-7M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART interface signal outputs. Waveshare UART GPS NEO-7M-C
Retired
No product available!
The LoPy board is an IoT module with a 32-bit microcontroller, equipped with LoRa, Wifi and Bluetooth (BLE) communication. Seeed studio 109110001
Retired
No product available!
Dragino LoRa Shield is an expansion board for Arduino (Uno, Leonardo, Mega, DUE) with a LoRa communication module (RFM98W system). Works at 433 MHz, maximum power up to 100 mW. In the set with the plate there is also an antenna. Seeed studio 113990194
Retired
No product available!
Module with color sensor TCS34725FN. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020341
Retired
No product available!
Module with GPS receiver (SIM28). The system allows you to track up to 22 satellites. The UART interface is used for communication with the system. The module has a connector in accordance with the Grove standard. Seeed Studio 113020003
Retired
No product available!
HSET06 PEREL Precision screwdriver set 6 pcs by VELLEMAN
Retired
No product available!
Card Kingston 32GB microSDHC Class 10 U3 UHS-I 90R / 80W + SD Adapter. Kingston SDCA3 / 32GB
Retired
No product available!
SanDisk Ultra microSDHC memory card with 32GB capacity, maximum reading speed up to 80 MB / s, Class 10 UHS-I
Retired
No product available!
No product available!
No product available!
The tape is used for shielding electronic devices and discharging electrostatic charges, self-adhesive, 50mm x 30m
Retired
No product available!
7\'\' Powertip LCD-TFT 800x480 px display with touch-panel, LED backlight, DC/DC converters, compatible with SoMLabs VisionSTK-xx and VisionCB base boards. SL-TFT7-TP-800-480
Retired
No product available!
A highly cost-effective audio hat which fits on the GPIO of the Raspberry Pi B+/2B/3B, uses i2S interface audio solution, supports 24-bit /192KHz high quality sound, compatible with other audio equipment via RCA lotus socket, includes a built-in high fidelity headphone amplifier, where you can plug in a 3.5mm audio jack directly. DFR0449