- Out-of-Stock
MultiWii NanoWii ATmega32U4 Micro Flight Controller USB/GYRO/ACC
ID: 222822
HK MultiWii NanoWii ATmega32U4 Micro Flight Controller USB/GYRO/ACC (22322)
MultiWii NanoWii ATmega32U4 Micro Flight Controller USB/GYRO/ACC (22322)
The NanoWii is a complete multi-rotor flight controller. It is based on the ATmega32U4, which is the processor of the Arduino Leonardo and incorporates a MPU-6050 chip, which is a combined gyro and accelerometer.
This is the ultimate solution for powerful flight performance with your multi-rotor project, especially micro size models. The possibilities are endless with the NanoWii, only limited by your imagination!
Features:
• Ultra-compact size
• Based on Atmega32u4
• 6 RX inputs
• 6 HW PWM @ 11bit (better resolution, smoother response)
• Up to 8 motors or servos
• Invensense MPU6050 6 axis gyro and accelerometer (supports auto-level)
• Onboard USB
• UART connector (for bluetooth telemetry, GPS, DSM2 satelite etc)
• I2C connector (add barometer or magnetometer for heading hold and altitude hold)
Comes preloaded with Arduino bootloader (Leonardo)
Specs:
Main chip: ATmega32U4
CPU speed: 16MHz
Flash size: 32kB (3.3kB are taken by the Bootloader)
Input: 6 x high-res RX inputs (2 AUX channels)
Output: 6~8 motor outputs (motor 1-6 are 11-bit PWM)
Dimension: 30x30x16mm
Weight: 5.1g
PRODUCT ID: 9387000009
Download
| Customer files | ||
| NanoWii User Manual | 1064kb | |
| NanoWii Board w/o connectors | 186kb | |
| ZJ QuadFPV-726 (Homemade FPV Quadcopter) | 1955kb | |
| NanoWii User Manual_v01.pdf | 1064kb | |
| No File Name | 247kb | |
| No File Name | 697kb | |
| Operating, Configuring and Trimming.pdf | 104kb | |
| PPMSUM order fix for MWI2.2 | 10kb | |
| MPU-6050 RM | 900kb | |
| MPU-6050 RM | 900kb | |
| No File Name | 838kb | |
| No File Name | 838kb | |
| No File Name | 838kb | |
| nanowii with spektrum sat and turnigy pl | 150kb | |
| tri setup | 243kb | |
| Multiwii Nano Pinout Diagram | 20kb | |
222822
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
5V / 3.1A eXtreme power supply with microUSB plug for all Raspberry Pi computers (including Pi 3 model B and Pi 3 model B +)
Retired
No product available!
Antenna with built-in LNA amplifier with high sensitivity, for mounting in a device using a GPS module. The antenna has a 25mm cable, terminated with a U.FL plug (IPEX). Dimensions of the device: 9 x 9 x 4mm
Retired
No product available!
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Retired
No product available!
Kit: MAXimator, MAXimator Expander, ZL32PRG - USB Blaster PRO
Retired
No product available!
Power Supply 2.5A 5.1V for Raspberry Pi 3 model B - STONTRONICS T5875DV
Retired
No product available!
MYD-JA5D44 Development Board is a complete educational platform. Its heart is the MYIR MYC-JA5D44 module, which was equipped with the Atmel SAMA5D44 processor based on Cortex-A5 cores. The processor can work at a maximum frequency of 600 MHz. Min. RS232, RS485 connectors, HDMI connector, 3.5 mm Jack Audio inputs, microSD memory card slot, 10/100 Mbps Ethernet slot and many more.
Retired
No product available!
The Raspberry Pi GPIO Triple Expansion Board converts the single GPIO headers on your Raspberry Pi into three parts. DFR0385
Retired
No product available!
Flex Cable for Raspberry Pi Camera - 300mm / 12". Adafruit 1648
Retired
No product available!
Comes with a 6"x6" (152mm x 152mm) square of Pyralux. It\'s ED-Y type copper at 35um (1 oz/ft2) and has a polymide of 25um (1 mil). The thick copper layer means it can carry a lot of current, and its trivial to solder to it. Adafruit 1894
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 50 cm - gray, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 50 cm - blue, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 1.5 m - black, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 3 m - black, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 5 m - blue, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 5 m - gray, with 2xRJ45 connectors
Retired
No product available!
The board gives the possibility to significantly extend the functionality of the STM32F407G-DISC1 development kit. The plate contains, among others memory card slot (microSD), Ethernet socket and connectors that can be used to attach SMT32F4DIS modules to the board
Delivery date unknown
No product available!
HK MultiWii NanoWii ATmega32U4 Micro Flight Controller USB/GYRO/ACC (22322)