.png)
- Out-of-Stock
Patchcord UTP Ethernet network cable gray - 5 m
ID: 561524
5906623438662
Patchcord UTP 5E Ethernet cable with a length of 5 m - gray, with 2xRJ45 connectors
Description
The cable is designed for connections at distribution points and subscriber outlet connections to active devices such as a switch, router or directly to the computer's network card. Patchcords are used in connections of passive and active devices in LAN, Ethernet, xDSL and telephone networks - at home, office and industry. Made in accordance with the applicable standards, subjected to repeated tests and verification ensure the highest transmission parameters and compliance with the given category.
They meet the following product and application standards: PN-EN 41003: 2001, PN-EN 50173: 2004, ISO / IEC 11801: 2002, ANSI / TIA / EIA-568-B.2-1, PN-EN 60-603-7 -1: 2002 (U).
properties
- Grey colour
- Plug: 2 x RJ45
- Length: 5 m
- Plug cover flooded
- Angle. 5e, UTP
- Connection type: 1: 1 straight (according to 568B standard)
- Veins: 26AWG x 4P link
- Insulation and outer coating: PVC
- Bandwidth: 100-125 MHz
561524
Data sheet
- Cable category
- 5e
- Ekranowany?
- U/UTP
- Cable length (m)
- 5 m
- Colour
- Gray
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Tester for testing cables with RJ45 and RJ11 plugs. Detects abnormalities such as short circuits, openings, reversed wires, swapped pairs. NAR0167
zł31.44
24h
Available quantity: 3
Available
Crimping tool for 8P8C (RJ-45), 6P6C (RJ-12), 6P4C (RJ-11), 6P2C plugs with a clipper. NAR0008
zł19.47
24h
Available quantity: 1
Available
Connector pliers for 8-pin, 6-pin, 4-pin connectors, incl. 8P8C (RJ-45), 6P6C (RJ-12), 6P4C (RJ-11), 4P4C, 4P2C PLUGS, DEC / OFF SET PLUG-6P6C, equipped with 2 knives. NAR0051
zł19.45
Delivery date unknown
No product available!
Available
Other products in the same category (16)
Module with a water level sensor with a measuring range of up to 10 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020635
Retired
No product available!
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070024
Retired
No product available!
Module with a 3-axis H3LIS331DL accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020071
Retired
No product available!
Blue mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070022
Retired
No product available!
Red mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070020
Retired
No product available!
Audio player module with MP3 decoder and microSD card slot. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 107020069
Retired
No product available!
Module with a sensor for measuring the heart rate PAH8001EI-2G. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020082
Retired
No product available!
Module with a 12-channel capacitive touch sensor MPR121 in a set with 4 touch probes. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020047
Retired
No product available!
2.4 GHz WiFi module based on W600. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 113020031
Retired
No product available!
Module with 1-axis ADXL1001 accelerometer with a range up to ± 100g. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020633
Retired
No product available!
Module with a 3-axis ADXL372 accelerometer with a measuring range up to ± 200g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020632
Retired
No product available!
Module with a 3-axis ADXL356B accelerometer with a measuring range up to ± 20g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020637
Retired
No product available!
Module with a 3-axis ADXL356C accelerometer with a measuring range up to ± 40g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020638
Retired
No product available!
Module with a 3-axis ADXL357 accelerometer with a measuring range up to ± 40g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020639
Retired
No product available!
The module with the ACS725 current sensor with a direct current measuring range up to 10 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020616
Retired
No product available!
The module with the ACS70331 current sensor with a direct and alternating current measuring range ±5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020615
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 5 m - gray, with 2xRJ45 connectors