.png)
- Out-of-Stock
Turnigy H.A.L. (Heavy Aerial Lift) - 585 mm quadcopter frame
ID: 222895
Turnigy HAL (Heavy Aerial Lift) - 585 mm quadcopter frame (HK22732)
Turnigy HAL (Heavy Aerial Lift) - 585 mm quadcopter frame (HK22732)
The Turnigy HAL frame (Heavy Aerial Lift) is made of high quality aluminum, thanks to which it has good functional properties and elegant appearance. The frame is ideal for building the FPV model or for mounting the camera / camera (a dedicated holder is available). The set includes a high chassis made of pipes (carbon fiber), and an optional low chassis is also available. The frame is equipped with a dome (fastened with clips) protecting the electronics. Engine mounting brackets are suitable for engines of types 28 and 35. Properties:
Weight: 614 g
Width: 585 mm
Engine mounting holes: 16/19/25 mm
The chassis can be mounted for X or + conditioning
To run, you need:
4 motors 28-XX or 35-XX
4 speed controllers (ESC) 18-30A
4 propellers 8x4..10x4.7 (2 CW / 2 CCW)
Flight controller
Package Lipo 2200..3000mAh 11.1V (3S)
4-channel transceiver equipment
PRODUCT ID: 9171000014
Download
| Customer files | ||
| HAL_frame-wLandingSkids | 257kB | |
| Turnigy HAL Aufbauanleitung | 622kb | |
| 50A ESC can fit | 251kb | |
| Half way done | 222kb | |
| Ready to fly | 280KB | |
| with y650 2axis camera gimbal | 1045kb | |
| landing gear x configuration | 955kb | |
| Hal Ready For Flight Gear | 3786kb | |
| HALwNAZA | 103kB | |
| HAL HoverflyPro Special | 3359kb | |
| HAL HoverflyPro Special Gimbal V1 | 2965kb | |
| HAL Brushless Gimbal | 3385kb | |
| HAL carbonated | 4197kb | |
| HAL carbon smooth fitted | 2651kb | |
222895
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
The Raspberry Pi GPIO Triple Expansion Board converts the single GPIO headers on your Raspberry Pi into three parts. DFR0385
Retired
No product available!
Flex Cable for Raspberry Pi Camera - 300mm / 12". Adafruit 1648
Retired
No product available!
Comes with a 6"x6" (152mm x 152mm) square of Pyralux. It\'s ED-Y type copper at 35um (1 oz/ft2) and has a polymide of 25um (1 mil). The thick copper layer means it can carry a lot of current, and its trivial to solder to it. Adafruit 1894
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 50 cm - gray, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 50 cm - blue, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 1.5 m - black, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 1.5 cm - gray, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 3 m - black, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 5 m - blue, with 2xRJ45 connectors
Retired
No product available!
Patchcord UTP 5E Ethernet cable with a length of 5 m - gray, with 2xRJ45 connectors
Retired
No product available!
The board gives the possibility to significantly extend the functionality of the STM32F407G-DISC1 development kit. The plate contains, among others memory card slot (microSD), Ethernet socket and connectors that can be used to attach SMT32F4DIS modules to the board
Delivery date unknown
No product available!
Camera board for the STM32F407G-DISC1 set. It allows you to capture an image with a resolution of 1280 x 1024 pixels (1.3MP). The set includes a flexible cable that allows the camera to be connected to the STM32F4DIS-BB expansion board
Retired
No product available!
The MyoWare Muscle Sensor is now designed to be wearable allowing you to attach biomedical sensor pads directly to the board itself. DEV-13687
Retired
No product available!
No product available!
This in-system programmer can be used to program AVR microcontrollers and AVR-based controller boards, such as our Orangutan robot controllers and the 3pi robot. Pololu 3170
Retired
No product available!
EXtreme CC312U 3100mA power supply / car charger with two USB ports, allows you to charge phones, navigation, mp3 / mp4 players and connect Raspberry Pi computers
Retired
No product available!
Turnigy HAL (Heavy Aerial Lift) - 585 mm quadcopter frame (HK22732)