KAmodCSIextender - CSI extension through HDMI cable for Raspberry Pi cameras
ID: 583788
5906623433346
zł44.90
Tax included
zł36.50 tax excl.
KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).
Description
KAmodCSIextender modules are designed for cooperation with Raspberry Pi cameras, especially for Raspberry Camera V2. These cameras use a 15-pin FPC flat cable (which may have a limited length and are susceptible to mechanical damage). KAmodCSIextender allows you to extend the signal from the cameras using the HDMI <-> HDMI cable (up to 10 meters, depending on the quality of the HDMI cable). The HDMI cable is more durable and less susceptible to damage than thin FPC tape. In addition to the camera signal, 3 other signals, eg. GPIO may also be extended. The module is designed for use with Raspberry Pi 4 model B, Raspberry Pi 3 model B + , Raspberry Pi 3 model B , Raspberry Pi 2 model B and Raspberry Pi 1 model B + and Jetson Nano.
Attention!
The set does not have an HDMI cable, you should buy it separately, eg. HDMI cable (M) - HDMI (M) 3m , the set also does not include a camera for Raspberry Pi, eg Raspberry Pi HD Camera V2 8MP - RPI Camera Camera Board V2
properties
- Works with Raspberry Pi 4 model B, Raspberry Pi 3 model B +, Raspberry Pi 3 model B, Raspberry Pi 2 model B and Raspberry Pi 1 model B + and Jetson Nano
- Works with Raspberry Pi cameras, especially with Raspberry Pi Camera V2 (8MP, IMX219)
- Allows you to use an HDMI cable with a maximum length of 10 meters (depending on the quality of the HDMI cable)
- It also allows you to extend 3 other signals
- Dimensions: 24,1 x 25,2 mm - allows to mount to all Raspberry cameras that dimensions are 25x24mm
Included
- 2 x KAmodCSIextender
- 1 x FPC tape 15 pins (100 mm)
- 1 x Mounting kit (8x M2 screws, 4x spacers)
583788
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
5-megapixel HD camera module with OV5647 sensor designed for Raspberry Pi computers. The camera is equipped with a fisheye lens, the focal length is adjustable. Waveshare RPi Camera (G)
zł79.69
Delivery date unknown
No product available!
Raspberry Pi Camera Module, Fixed-focus, 5 megapixel OV5647 sensor in a fixed-focus module. Waveshare RPi Camera (D)
zł59.41
24h
Available quantity: 3
Available
The official “night vision” camera board released by the Raspberry Pi Foundation. High quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It\'s capable of 3280 x 2464 pixel static images, and also support 1080p30, 720p60, and 640x480p60/90 video.
zł79.90
Delivery date unknown
No product available!
High quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It\'s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60, and 640x480p90 video
zł79.90
24h
Available quantity: 73
Available
Flex Cable for Raspberry Pi Camera - 100mm / 4"
zł2.90
24h
Available quantity: 538
Available
5MP Mini Camera OV5647 Sensor 1080p 720p video for Raspberry Pi official Board. ArduCAM B0033
zł39.90
24h
Available quantity: 1
Available
Raspberry Pi Camera Module, Fisheye Lens, Wider Field of View. Waveshare RPi Camera (J)
zł127.01
24h
Available quantity: 6
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł162.90
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 149
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
IMX219 Visible Light Fixed Focus Camera Module for Nvidia Jetson Nano and Raspberry Pi Compute Module. Arducam B0191
zł141.91
24h
Available quantity: 8
Available
5MP camera for Raspberry Pi minicomputers (1080p resolution). OV5647 sensor
zł39.09
24h
Available quantity: 3
Available
5MP camera for Raspberry Pi minicomputers (1080p resolution). Equipped with OmniVision OV5647 sensor.
zł20.52
24h
Available quantity: 41
Available
Other products in the same category (16)
Case designed for ArduCAM cameras for Raspberry Pi. It is compatible with camera modules with dimensions of 25x24 mm. ArduCAM U6251
zł11.50
4 weeks
No product available!
A tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1128
zł6.17
24h
Available quantity: 251
Available
The control platform equipped with servos allows you to control the position of the camera in two dimensions. It has a built-in driver and light sensor. Waveshare Pan-Tilt HAT
zł71.73
24h
Available quantity: 4
Available
Flex Cable for Raspberry Pi Camera - 300mm / 12"
zł4.31
24h
Available quantity: 91
Available
Flex Cable for Raspberry Pi Camera - 200mm / 8"
zł2.90
24h
Available quantity: 266
Available
A set with a 2 DOF control platform for cameras designed for Raspberry Pi, Nvidia Jetson Nano and Xavier NX. It is based on two digital servos and dedicated board. ArduCAM B0283
zł204.38
24h
Available quantity: 1
Available
ArduCam CSI to HDMI modules are designed to work with cameras: Raspberry Pi V1 and Raspberry Camera V2. ArduCAM CSI to HDMI allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters). Arducam B0091
zł61.38
24h
Available quantity: 12
Available
A tape enabling the connection of a camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Waveshare Pi5-Camera-Cable-300mm
zł10.16
24h
Available quantity: 7
Available
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-200mm
zł4.59
24h
Available quantity: 16
Available
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
zł2.95
24h
Available quantity: 49
Available
A tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1130
zł16.86
24h
Available quantity: 220
Available
A tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1129
zł10.46
24h
Available quantity: 192
Available
The Arducam B0210 set includes three flexible ribbons with lengths of 38 mm, 73 mm, and 150 mm, designed for connecting camera modules to Raspberry Pi Zero and Zero 2W. Each ribbon features a 15-pin connector with a 1.0 mm pitch on one end and a 22-pin connector with a 0.5 mm pitch on the other, ensuring compatibility with official V1, V2, and HQ cameras, as well as most Arducam modules.
zł22.60
24h
Available quantity: 4
Available
The 15 cm long tape allows you to connect the camera to the Raspberry Pi Zero series. Waveshare RPi Zero V1.3 Camera Cable 15cm
zł8.24
24h
Available quantity: 43
Available
The set of three black flexible Arducam ribbons for Raspberry Pi cameras includes cables with lengths of 5 cm, 60 cm, and 100 cm, featuring 15-pin connectors with a 1.0 mm pitch on both ends. They are compatible with all Raspberry Pi A and B series models, camera modules, and displays. Perfect for projects such as 3D printers, home security systems, or other Raspberry Pi camera applications, offering a discreet appearance.
zł39.99
24h
Available quantity: 5
Available
A tape enabling the connection of a DSI display with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on a Raspberry Pi 5 computer. Raspberry Pi SC1132
zł10.32
24h
Available quantity: 317
Available
KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).