ArduCAM B0191 - Module with IMX219 camera for Nvidia Jetson and Raspberry Pi
ID: 576984
5906623403172
zł141.91
Tax included
zł115.37 tax excl.
IMX219 Visible Light Fixed Focus Camera Module for Nvidia Jetson Nano and Raspberry Pi Compute Module. Arducam B0191
Description
This Arducam IMX219 camera module is designed mainly for the Nvidia Jetson Nano platform and also can be used on other hardware like ARM, DSP, FPGA, etc.
Features
- Sony 8MP IMX219 Sensor
- Optical Format: 1/4 inch
- EFL: 3.04mm
- F.NO: 2.0
- Focus Type: Fixed Focus
- View Angle: 62.2 (Diagonal)
- Interface: MIPI CSI-2 2-lane
576984
Data sheet
- Resolution
- 8MPx
- Interface
- MIPI CSI-2
- Sensor
- Sony IMX219
- IR filter
- Yes
- Lens assembly
- none
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with Tegra X2 SoC system containing four 64-bit ARM Cortex A57 cores and a Pascal graphics system consisting of 256 cores supporting CUDA technology. NVIDIA Jetson TX2 900-83310-0001-000.
zł3,910.99
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).
zł44.90
24h
Available quantity: 537
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,055.36
24h
Available quantity: 1
Available
Other products in the same category (16)
Inspection camera with a flexible probe, 1m long. It allows you to observe the interior of the devices from different angles through a small inspection opening without the need to disassemble them. Uni-T UT665
zł317.34
2 weeks
No product available!
Camera module with IMX519 sensor dedicated to Raspberry Pi minicomputers. It uses a 16 MP matrix and allows you to record video in resolutions of 1080p@30fps. ArduCAM B0371
zł129.68
24h
Available quantity: 7
Available
Camera module based on CMOS AR0134 matrix with a resolution of 1280x960 px (1.2 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0110
zł457.77
24h
Available quantity: 1
Available
Locking ring for M12 mount lenses. Arducam U6136
zł1.57
24h
Available quantity: 15
Available
A set of cameras designed for artificial intelligence projects (two 720p and one 12 MPx) configured via USB. ArduCAM OAK-D
zł1,586.77
4 weeks
No product available!
The OV5640 camera module is equipped with a 5 MP sensor and a lens with a wide viewing angle of 120 degrees and minimal distortion. It is perfect for applications related to security systems, monitoring or recording large areas. Adafruit 5839
zł66.42
4 weeks
No product available!
3D stereo camera module, which is built with two cameras with Sony IMX219 sensor and ICM20948 IMU sensor. It is designed to work with the Raspberry Pi Jetson Nano. Waveshare IMX219-83 Stereo Camera
zł310.44
4 weeks
No product available!
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221
zł523.50
4 weeks
No product available!
A set with a 64 MP camera and an adapter enabling the transmission of the CSI signal via an HDMI cable. Designed for Raspberry Pi and Jetson Nano minicomputers. The adapter module is also equipped with an audio connector and allows you to connect a microphone and headphones. ArduCAM B0399B0091
zł332.36
4 weeks
No product available!
5 MP CMOS camera with M12 lens and Rolling Shutter, designed for IoT, monitoring and automation. Communicates via SPI interface, works with popular microcontrollers (Arduino, ESP32, STM32, Raspberry Pi Pico), offers low power consumption and high image quality with <1.53% distortion. Supports JPEG, RGB, YUV formats and allows you to connect up to 4 cameras simultaneously; integration facilitated by open SDK under MIT license. ArduCAM B0436
zł207.56
24h
Available quantity: 1
Available
A set of four M12 lenses is an ideal choice to be used with oCam series cameras. Lens set with IR cut filter
zł401.80
24h
Available quantity: 1
Available
DFRobot FIT1023 USB camera with an OV5648 sensor and autofocus provides high image quality and easy integration thanks to UVC compatibility. It supports MJPEG and YUY2, operates without drivers, and is used in vision systems, education, automation, and AI prototyping.
zł175.46
24h
Available quantity: 3
Available
A 12MP camera with a USB 2.0 interface. Equipped with a sensor with a 110° wide-angle lens and a microphone. ArduCAM B0433
zł276.11
24h
Available quantity: 6
Available
Mini camera module with IMX477 HQ sensor designed for Raspberry Pi. Equipped with a lens with an M12 mount with a viewing angle of 75°. ArduCAM B0262
zł316.57
4 weeks
No product available!
Camera module designed for RP2040 development boards. It uses the Himax HM01B0 sensor to achieve excellent performance in low light. ArduCAM B328
zł60.73
24h
Available quantity: 3
Available
Module with IMX462 sensor working with Raspberry Pi. It has a 2 MP matrix and is compatible with ISP and Gstreamer. ArduCAM B0333
zł335.08
4 weeks
No product available!
IMX219 Visible Light Fixed Focus Camera Module for Nvidia Jetson Nano and Raspberry Pi Compute Module. Arducam B0191