zł252.39 tax excl.
3D stereo camera module, which is built with two cameras with Sony IMX219 sensor and ICM20948 IMU sensor. It is designed to work with the Raspberry Pi Jetson Nano. Waveshare IMX219-83 Stereo Camera
The 3D stereo camera module, which is built with two cameras with a Sony IMX219 sensor and an IMU ICM20948 sensor that combines an accelerometer, gyroscope and magnetometer. The sensor used has an 8 MP sensor and a wide 83° viewing angle. The module attaches to the evaluation kit via dedicated sockets and uses a CSI interface developed specifically for working with cameras. The IMU is controlled via an I2C interface. The kit allows to realize AI vision applications such as deep vision and stereo vision. Full documentation with usage examples is available on the product page.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
5 MP camera module with OV5647 sensor compatible with Raspberry Pi boards equipped with CSI connector (e.g. Raspberry Pi 5, 4, 3, 2, Zero), featuring interchangeable M12x0.5 lens and included HX-27227 4 mm lens, approx. 56° horizontal field of view, maximum video resolution 1080p. ArduCam B0031
OV5647 Camera Board /w CS mount Lens fully compatible with Raspberry Pi. ArduCAM B0032
1/9" CMOS VGA (640x480) image sensor with OmniPixel3-HS™ technology. ArduCAM B0070
No product available!
OV7725 based on Omnivision OV7725 image sensor; low voltage CMOS device provides the full functionality of a single-chip VGA camera and image processor as well as the extraordinary high frame rate and low light performance. It provides full-frame, sub-sampled or windowed 8-bit/10-bit images in a wide range of formats, controlled through the Serial Camera Control Bus (SCCB) interface. ArduCAM U3182
Infrared Camera Module. ArduCAM B0059
No product available!
Camera module with MT9D111 matrix with a resolution of 2 MPx and size 1 / 3.2 ". The transmission speed in JPEG format at full resolution of 1600 x 1200 pixels is 15 fps. It is equipped with a CS mount lens with parameters: 3MP, 1: 1.4, focal length 4.0 mm , format 1 / 2.5 \'\'. The device works with 3.3 V, it communicates via a parallel interface. ArduCam B0009
New 5MegaPixel AutoFocus CMOS camera module with JPEG output. The camera module is based on Omnivision OV5640 image sensor and can be used with ArduCAM shields and other platforms like Freescale i.MX6 develop board. ArduCam U3183
ArduCam OV5642 5 MPx camera module with OV5642 matrix. Resolution: 2592 x 1944 pixels (5 MPx), pixel size: 1.4 x 1.4 μm, built-in JPEG encoder - operating in real time. B0019
Camera module with an OV5642 matrix with a resolution of 5 MPx and a size of 1/4 "with output in JPEG format. The transmission speed in the full resolution of 2592 x 1944 pixels is 15 fps. It is equipped with an M12x0.5 1/4 \'\' lens. The device works with 3.3 V, it communicates via a parallel interface. ArduCam B0020
Raspberry Pi Camera Module, Fisheye Lens, Wider Field of View. Waveshare RPi Camera (J)
Monochrome camera module 10 Mpx with sensor MT9J001 / MT9J003 designed for use with the ArduCam USB Shield module. Lens LS-18023M12. Support for video recording 1080p @ 30fps and VGA @ 60fps. Arducam 10MP: MT9J001 / MT9J003
Camera module with Sony IMX219 sensor works with all versions of Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx, the maximum video resolution is 1080p. ArduCAM B0103
No product available!
Camera module with Sony IMX219 sensor works with all versions of Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx, the maximum video resolution is 1080p. ArduCAM B0102
The camera module is based on a CMOS sensor - AR0134. It has a resolution of 1280 x 960 px (1.2 MPx). The module supports recording of video sequences: 1280 x 960 @ 54fps and 1280 x 720 @ 60Ffps. Intended for use only with the ArduCam USB Shield module. Arducam B0100
No product available!
Evaluation set designed for the use of Internet of Things based on ArduCAM-Mini-2MP and ArduCAM-ESP8266-Nano-V2 modules. ArduCAM-Mini-2MP is a module with a 2 megapixel camera with an OV2640 transducer and an ESP8266 chip. Mounting the M12 lens. ArduCAM B0085
3D stereo camera module, which is built with two cameras with Sony IMX219 sensor and ICM20948 IMU sensor. It is designed to work with the Raspberry Pi Jetson Nano. Waveshare IMX219-83 Stereo Camera