Camera cable 15 cm for Raspberry Pi Zero 2 W - Waveshare 11944

The PCIe (D) adapter enables the installation of a high-speed M.2 NVMe SSD on the Raspberry Pi 5, offering a significant improvement in read and write speeds compared to microSD cards. It supports system boot from the SSD, making it a suitable solution for performance-demanding projects such as file servers, database systems, or advanced development environments using the Raspberry Pi 5.

The PCIe HAT for 4G/5G modems and USB 3.2 Gen1 enables integration of high-speed cellular connectivity and USB port expansion in Raspberry Pi 5 projects. It supports M.2 Key B standard modems, ensuring compatibility with a wide range of frequencies and SIM card formats. The built-in power monitoring system and HAT+ compliance allow for advanced power management. Ideal for use in industrial routers, IoT gateways, mobile communication systems, and projects requiring fast 4G/5G network access.

An enhanced version of the Raspberry Pi Pico 2 with access to all 48 GPIO pins and an RP2350B microcontroller (Cortex-M33 or RISC-V) clocked at up to 150 MHz. It offers 16 MB of Flash, 8 MB of RAM, and a microSD card reader, making it ideal for complex embedded and IoT projects. With USB-C, Qwiic/Stemma Qt, UEXT connectors, and BOOT/RESET buttons, it offers high flexibility and easy integration with peripherals. Olimex RP2350-PICO2-XXL

The PCIe To M.2 MINI adapter allows the Raspberry Pi 5 to be expanded with a high-speed NVMe SSD, offering high bandwidth and the ability to boot the system directly from the drive. Its compact form makes the module ideal for projects that require high computing power and fast data access within limited mounting space. It is well-suited for file systems, servers, terminals, and embedded projects using the Raspberry Pi 5.

The PCIe Expansion HAT+ for Gigabit ETH USB3.2 allows the Raspberry Pi 5 to be extended with three high-speed USB 3.2 Gen1 ports and one Gigabit Ethernet connector, using the 16-pin PCIe interface. The device operates without the need for driver installation and offers full support for popular Linux systems. Thanks to additional features such as power monitoring and USB port power control, the module is ideal for advanced networking projects, home servers, and expanded workstations based on the Raspberry Pi 5.

The Bus Servo Driver HAT (A) with the ESP32-WROOM-32 microcontroller enables simultaneous control of up to 253 ST and RSBL servos, supporting both wired and wireless communication in robotic applications. Designed for integration with Raspberry Pi, it features 5 V power supply from a converter and full support for UART and USB-C transmission. JSON command handling and automatic WiFi network startup allow for remote control and easy integration with various development environments. Ideal for robotic arm projects, walking robots, and other constructions requiring multiple servos with closed-loop control.

Micro HDMI to HDMI adapter with two power supply modes and dual 4K output support, designed to work with Raspberry Pi 5 and Raspberry Pi 4B, enables reliable connection of displays and UART signal transmission. It is suitable for multimedia projects, presentation systems, and embedded solutions where a compact and functional solution for video support and serial communication is required.

PCIe TO M.2 HAT+ Acce B adapter for Raspberry Pi 5 with a 256 GB NVMe 2242 SSD, support for M.2 2230 / 2242 drives, PCIe Gen2 / Gen3 modes, and SSD boot support. Waveshare 27523

The PCIe TO M.2 HAT+ Acce A kit with a 128 GB SSD is a ready-to-use solution that expands the Raspberry Pi 5 with fast NVMe storage, providing enhanced performance and the ability to boot from the drive. With its compact design, power monitoring support, and compatibility with 2230/2242 form factors, the kit is ideal for building home servers, NAS systems, workstations, and projects requiring high data throughput.

The Argon BLSTR DAC kit, designed for the Argon ONE V3 case, is an excellent solution for Raspberry Pi 5 users seeking high-quality audio. Easy to install, featuring the precise PCM5122 DAC chip and ground loop isolator to eliminate noise, this expansion is ideal for music playback systems, home theater setups, and multimedia projects.

The 2-CH CAN MiniPCIe card is a versatile tool for integrating and analyzing CAN bus networks in industrial PCs, development boards, and embedded systems. With isolated channels, broad protocol compatibility, and support for multiple development platforms and operating systems, it is ideal for applications such as automation, automotive systems, CAN network testing, and software development.

The PCIe TO 2-CH M.2 HAT+ expands the functionality of the Raspberry Pi 5 by enabling the installation of two NVMe SSDs, offering significantly improved read/write performance and the option to boot from disk. With its compact design, support for 2230/2242 form factors, and built-in power monitoring, the adapter is well-suited for server solutions, NAS projects, multimedia systems, and advanced industrial applications.

The 2-CH CAN HAT+ expansion board adds two isolated CAN channels to the Raspberry Pi, with support for further expansion. Featuring the HAT+ standard, galvanic isolation, and surge protection, it is well-suited for industrial, automotive, and automation applications where reliable and safe serial communication is essential.

Raspberry Pi Pico 2 H, based on the RP2350 microcontroller, using the application and functional applications of the Cortex M33 and RISC-V cores, doubled SRAM memory and advanced security function, including Arm TrustZone. It is hardware and software with a connected model, which provides an attractive operation for enthusiasts and specialists in systems used. Version with joints.

Raspberry Pi Pico 2WH, based on the RP2350 microcontroller and has a built-in WiFi and Bluetooth communication module. Pi Pico 2WH offers significantly increased performance and functionality thanks to the use of Cortex M33 and RISC-V cores, doubled SRAM memory and advanced security features, including Arm TrustZone. It is hardware and software compatible with previous models, making it an attractive choice for enthusiasts and professionals in the field of embedded systems. Version with soldered joints.

The Raspberry Pi USB-C 45W Power Supply is a high-performance power source designed to work with the Raspberry Pi 5 and other devices compatible with the USB Power Delivery standard. Thanks to the dynamic selection of the voltage-current profile and the maximum power of 45 W, it allows for stable power supply for both single-board computers and external drives and mobile devices. It works well as a universal power solution in the workshop and educational environment