The SN74LVC1T45DRLR from Texas Instruments is a single-channel, bidirectional voltage level translator, covering a range from 1.65 V to 5.5 V, ideal for signal conversion in microprocessor systems and mobile devices. With automatic detection of the transmission direction and a compact SMD SOT-5X3 package, the device is easy to implement and works well in limited mounting spaces.

The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240

Flexible LED (LED filament) in white (warm), length 300 mm

Crowtail – Digital Temperature Sensor 2.0 is a precise TMP102 digital sensor with an I2C interface, operating in the range of –40°C to +125°C. Intended for use in temperature-measurement systems in automation, consumer electronics, and environmental monitoring.

Crowtail – Collision Sensor 2.0 is a mechanical collision sensor with a digital output, detecting impacts through pressure on a microswitch. Used in mobile robotics for detecting contact with obstacles.

Expansion board for XIAO, enabling easy CAN Bus communication by integrating MCP2515 and SN65HVD230. Ideal for applications in vehicles, industrial control systems and robotics, it provides reliable data exchange and easy integration into the XIAO ecosystem. Seeed Studio 105100001

SanDisk Extreme microSDXC 64GB V30 Memory Card. Designed for intensive use in harsh conditions, perfect for video monitoring, drones, action cameras, professional cameras, and telemetry systems, offering fast data writing speeds of up to 90 MB/s

A set of basic electronic components (such as resistors, diodes or capacitors) complete with a contact plate and connecting cables. It is ideal for beginner electronics who also know Arduino

BOB-12731

The TEA5767 module with an I²C interface and a frequency range of 76–108 MHz enables FM stereo signal reception in electronic projects. High sensitivity and compact design make it suitable for both mobile and stationary applications.

A 3-port HUB module with a USB 2.0 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT

Energy-saving 24 GHz sensor LD2410S based on FMCW technology and the Doppler effect, designed to detect human presence and micro-movements in real time. Thanks to the built-in AI algorithm and a range of up to 8 meters and a wide detection angle (±60°), it is perfect for building automation, smart lighting and IoT devices. It supports UART and GPIO interfaces, offers very low power consumption (from 0.04 mA in standby mode) and allows configuration through intuitive tools, making it ideal for integration in modern projects.

Large momentary button with a diameter of 100 mm with LED backlight. It was based on a limit switch. The housing is black

Waveshare BLE4.0 Bluetooth 2.4G Mother Board, provides I/O expansion connectors and various interfaces. BLE400

Switch module with an interlock. DFRobot DFR0423

DisplayPort 1.1 male to VGA female adapter on 20 cm cable, video transmission up to 1920 × 1080 px, gold-plated contacts, unidirectional video conversion

The MPI-01 miniature industrial relay ensures high reliability and functionality, meeting the requirements of industrial insulation and safety standards. Finder 55.34.8.230.0040

BMP390 is a compact, energy-efficient barometric pressure sensor with high accuracy, designed for precise altitude measurement and mobile applications. Thanks to its I2C/SPI interfaces and SMD mounting, it is widely used in embedded projects and wearable devices.

Its a mini HDMI decoder board which you can use as an all-in-one display driver for TTL displays, or perhaps decoding HDMI/DVI video for some other project. This breakout features the TFP401 for decoding video, and for the touch version, an AR1100 USB resistive touch screen driver. Adafruit 2218

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.