

USB 2.0 HUB with 3 USB ports and one RJ45 port designed to work with the Raspberry Pi minicomputer. The Hub is connected to larger versions via the USB micro B connector with a cable, and to the Zero versions via the adapter included in the set. The module uses the RTL8152B chip. Full documentation is available on the Wiki website.
1. GPIO 40-pin | 5. Ethernet TS8121A filter |
2. USB port | 6. Ethernet RTL8152B chip |
3. RJ45 connector | 7. USB HUB FE1.1S chip |
4. USB HUB port | 8. LED indicators |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)
Miniature version of the Raspberry Pi computer equipped with SiP BCM2710A1 - 4x ARM Cortex-A53 1GHz twin with Raspberry Pi 3 and 512 MB of RAM and wireless connectivity WiFi 802.11 b / g / n + Bluetooth 4.2 / BLE
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT
Threaded hexagon spacer M2,5, sleeve length 14mm, female-female. The sleeve is made of brass
HDMI adapter that allows you to connect displays with an HDMI connector to the Raspberry Pi minicomputer, without using a cable
100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 1.14 mm
The DS3231 RTC module for Raspberry Pi is a high-precision, battery-powered, I2C-communicating real-time clock that provides accurate timekeeping thanks to temperature compensation and a quartz resonator
The official Raspberry Pi USB mouse with three buttons and a scroll wheel. The ergonomic design ensures comfort of use. Mouse in white and red. Raspberry Pi
KAmodRPi400-ADP is a board designed for a Raspberry Pi 400 and Raspberry Pi 500 computer that allows you to conveniently connect modules designed for older versions of the Raspberry. Moreover, it allows to connect modules equipped with Pmod and Kamami I2C connectors.
A set of three heat sinks for Raspberry minicomputers: Pi 4 model B, Pi 3 model B+, Pi 3 model A+, Pi 3 model B, Pi 3 model B, Pi 2 model B and Pi 1 model B . The heat sinks have adhesive tape.
No product available!
40-pin cable dedicated to Raspberry Pi minicomputers. It has a male connector on one side and a female connector on the other
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets. Adafruit 954
KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).
A tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1130
A portable gaming console based on the Raspberry Pi Zero, featuring a 2" IPS LCD display and speaker. Waveshare GamePi20 Acce
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm
No product available!
RTC battery with cable dedicated to Raspberry Pi 5 minicomputers. It has a capacity of 64 mAh at a nominal voltage of 3.6 V, which guarantees long-lasting power supply. It is perfect for projects related to time measurement, data logging or real-time systems. Waveshare RTC-Battery-B
Adapter DSI 22-pin to 15-pin. It allows you to connect displays with a DSI 15-pin connector to the Raspberry Pi Compute Module base boards. Waveshare CM-DSI-ADAPTER
A small board with a description of the GPIO connector outputs for Raspberry Pi.
A 3-port HUB module with a USB 2.0 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT