BOB-12731

A connector that allows you to connect the cable to the existing installation without having to cut the cable. Suitable for wires with a cross-section of 0.5-1.5mm2

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm

The MPI-01 miniature industrial relay ensures high reliability and functionality, meeting the requirements of industrial insulation and safety standards. Finder 55.34.8.230.0040

OLED display resolution 128x32 pixels, yellow letters on a black background (yellow), 3V power, SSD1306 driver, communication via SPI interface, working temperature from -40 to +70.

Adapter with SMA male connector on both ends. Allows the conversion of a female SMA connection with standard polarity to a male one. SparkFun WRL-21225

Driver module for two DC brushed motors with current efficiency up to 5 A per channel. It can work with LiPo 2S and 3S packets

Camera with CMOS sensor GC0308 with a resolution of 640x480 px. Equipped with motion detection, it communicates via a parallel interface. ArduCAM U6031-LEN

LED strip with addressable RGB WS2813B diodes on a black PCB. It is powered by 5 V DC, has a length of 5 m and 60 LEDs/m. Protection degree IP67

A switching converter that regulates 18V from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5587

The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 30 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5380

A switching converter that stabilizes a 15V voltage from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5586

BMS protection module designed for 7 Li-Ion cells. It has a charging function with balancer option and an over-discharge protection function. Dedicated to an electric bicycle or scooter

The Finder 40.52.7.024.000 relay is a compact DPDT relay, designed to operate with a 24VDC coil and handles currents up to 8A at 250VAC. Its robust design and small dimensions make it ideal for automation and control applications, especially in confined spaces.

Universal silicone cover that protects the LED strip from moisture, water, and dirt. Provides protection in accordance with the IP67 standard.

This sensor utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection; suitable for hazardous applications: detecting toxic substances and all kinds of liquid in an airtight container under high pressure. SEN0204

Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-1000-R

3-pin ARK mounting strip, 5.0 mm pitch. 301-5.0-03P-12-00A(H)-BC. Set of 10 pieces