Reverse Voltage Protector - reverse voltage protection module 4-60V, 10A
ID: 1196554
5902186320901
zł12.25
Tax included
zł9.96 tax excl.
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 30 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5380
Description
The Pololu Reverse Voltage Protector is a compact solution designed to protect connected loads from reverse voltage polarity up to -60 V. By utilizing the LM74500-Q1 ideal diode controller and a MOSFET transistor, the device operates within a voltage range of 4 V (3.2 V after startup) to 60 V. When the voltage is correctly connected, the module allows free current flow; however, in the event of incorrect polarity, it blocks the voltage and protects the circuit from damage.
The device features a very low power path impedance (approximately 10 mΩ), enabling a continuous current flow of up to 10 A and a peak current of 30 A for short durations. This version does not block reverse current, making it suitable for applications such as battery-powered motor control, where energy recovery back to the power source is desirable.
The module includes large mounting holes that allow connection of wires or the use of 5 mm pitch screw terminals. Additionally, smaller 2.54 mm pitch holes are available for soldering standard pin headers. The bottom side of the board features pads for an optional transient voltage suppression (TVS) diode, enhancing system resilience against sudden voltage spikes.
Features
- Input voltage: 4 V to 60 V (3.2 V after startup)
- Reverse voltage protection up to -60 V
- Current capability: up to 10 A continuous, up to 30 A peak
- Power path impedance: approximately 10 mΩ
- Supports wires and terminals with 5 mm or 3.5 mm pitch
- Solder pads for optional TVS protection
- Dimensions: 7.6 x 12.7 mm
1196554
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389
zł31.25
24h
Available quantity: 6
Available
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388
zł25.18
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5387
zł29.75
24h
Available quantity: 6
Available
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5386
zł23.37
24h
Available quantity: 3
Available
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5381
zł16.41
24h
Available quantity: 5
Available
Other products in the same category (16)
DFRobot DFR0316
zł54.67
24h
Available quantity: 5
Available
Class A power amplifier with one channel (mono) with the power of 10 W. Built on the popular design of J. Hood from 1969.
zł70.12
4 weeks
No product available!
Zeenko ZK04-UM is a compact low-noise RF amplifier operating in the 100 kHz – 4 GHz range, powered via USB-C, featuring high linearity and low noise levels. Ideal for amplifying antenna signals or as a preamplifier for spectrum analyzers such as the tinySA ULTRA, especially above 3.5 GHz.
zł58.34
6 weeks
No product available!
Module with the driver of motors TB6612FNG and driver PWM PCA9685 for Raspberry Pi Pico. It allows you to control the movement of 4 DC motors. Waveshare Pico-Motor-Driver
zł72.93
24h
Available quantity: 2
Available
Step-Down converter D36V50F3 with an output voltage of 3.3 V, an input voltage from 4.5 to 50 V and a maximum output current of 9.5 A. Pololu 4090
zł137.49
24h
Available quantity: 1
Available
Class AB audio amplifier with three output channels. It can be powered with AC voltage from 8 to 18 V and has two outputs with a power of 18 W (left and right) and one with a power of 20 W (bass)
zł48.60
4 weeks
No product available!
Pololu - 2511
zł41.29
24h
Available quantity: 1
Available
Module with 2 5 V relays with a maximum switching current of 2 A. It communicates via the USB interface and does not require an additional power supply. Numato Lab USBPOWRL001
zł166.12
24h
Available quantity: 5
Available
Crowtail – Encoder 2.0 is a digital rotary encoder with 20 pulses per revolution and a dual-channel output for measuring angle and rotation direction. Used in control projects, interfaces, and axial motion detection systems.
zł11.46
24h
Available quantity: 4
Available
The Step-Down D24V6F5 Buck Voltage Regulator module gives the output voltage of 5V with a wide input voltage range of 7-42V and a maximum output current of 600 mA. Pololu 2107
zł41.72
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5040
zł327.65
4 weeks
No product available!
A switching converter that regulates 18V from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5587
zł14.17
24h
Available quantity: 5
Available
IO port expander for M5Stack kits. Equipped with 8 IO pins and power pins, it communicates via the I2C interface. M5Stack U011-B
zł38.90
24h
Available quantity: 1
Available
A handy way to power 12V powered devices with a center-positive 2.1mm DC barrel jack from a USB port. Adafruit 2778
zł32.98
24h
Available quantity: 3
Available
Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G
zł135.09
4 weeks
No product available!
The 7A 1-2S BLheli_S XSD7A Miniature Brushless Motor ESC Controller is a compact, high-performance device ideal for controlling brushless motors in small projects. Thanks to its low weight and solid power, it is suitable for drones, RC models and other applications requiring precise motor control.
zł65.58
24h
Available quantity: 1
Available
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 30 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5380