Reverse Voltage Protector - reverse voltage protection module 4-60V, 20A
ID: 1196549
5902186320871
zł23.37
Tax included
zł19.00 tax excl.
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5386
Description
The Pololu Reverse Voltage Protector is a compact solution designed to protect connected loads from reverse voltage polarity up to -60 V. By utilizing the LM74500-Q1 ideal diode controller and a MOSFET transistor, the device operates within a voltage range of 4 V (3.2 V after startup) to 60 V. When the voltage is correctly connected, the module allows free current flow; however, in the event of incorrect polarity, it blocks the voltage and protects the circuit from damage.
The device features a very low power path impedance (approximately 3 mΩ), enabling a continuous current flow of up to 20 A and a peak current of 50 A for short durations. This version does not block reverse current, making it suitable for applications such as battery-powered motor control, where energy recovery back to the power source is desirable.
The module includes large mounting holes that allow connection of wires up to 14 AWG or the use of 5 mm pitch screw terminals. Additionally, smaller 2.54 mm pitch holes are available for soldering standard pin headers. The bottom side of the board features pads for an optional transient voltage suppression (TVS) diode, enhancing system resilience against sudden voltage spikes.
Features
- Input voltage: 4 V to 60 V (3.2 V after startup)
- Reverse voltage protection up to -60 V
- Current capability: up to 20 A continuous, up to 50 A peak
- Power path impedance: approximately 3 mΩ
- Supports wires up to 14 AWG and 5 mm pitch terminals
- Solder pads for optional TVS protection
- Dimensions: 12.7 x 15.2 mm
1196549
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389
zł31.70
24h
Available quantity: 5
Available
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388
zł24.22
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5387
zł31.22
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5381
zł16.41
24h
Available quantity: 5
Available
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 30 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5380
zł12.25
24h
Available quantity: 5
Available
Other products in the same category (16)
Module with 32 relays 12 V with a maximum switching current of 7 A. Numato Lab RL320003
zł333.40
3 weeks
No product available!
USB - UART converter based on the PL2303 chip. Compatible with voltages of 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a USB type A connector. Waveshare PL2303 USB UART Board (type A) V2
zł12.63
24h
Available quantity: 55
Available
The expansion module is designed to work with micro:bit. It allows you to control 4 DC motors or two stepper motors and 8 servos. It communicates via the I2C interface. DFRobot DFR0548
zł84.92
24h
Available quantity: 3
Available
The step-down converter module allows you to reduce the voltage from 24-60 V to a stable 24 V at a current of up to 8 A. High efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device has built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5684
zł229.73
6 weeks
No product available!
USB-UART converter based on the CP2102N chip. Compatible with a voltage of 3.3 V, it has been equipped with a USB type C connector. Adafruit 5335
zł30.74
24h
Available quantity: 2
Available
Stereo audio amplifier module with the TDA7294 chip with a power of up to 100 W. It provides high-quality and effective audio signal amplification and good sound quality. Ideal for audio enthusiasts and professional use
zł116.30
4 weeks
No product available!
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)
zł84.30
4 weeks
No product available!
Module with a bistable button and red LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-R
zł18.86
24h
Available quantity: 2
Available
Available
Module with EEPROM 24LC32 memory with a capacity of 32 kBit (4 kB). Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5146
zł22.03
24h
Available quantity: 3
Available
The high power motor driver module works on the basis of Infineon BTS7960B systems. Maximum controller current: 43 A, operating voltage range: 5.5V - 27V. The module has a heat sink and can be controlled from the Arduino, Raspberry Pi, and STM levels. IBT_2
zł39.30
24h
Available quantity: 40
Available
Class D mono digital audio amplifier module PAM8302. The system allows you to connect one loudspeaker with an impedance from 4 to 8 Ω and a power of 2.5 W
zł5.22
24h
Available quantity: 20
Available
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5383
zł18.51
24h
Available quantity: 4
Available
A module that provides galvanically isolated, bidirectional I²C communication and isolated power supply, protecting devices from misconnections and voltage differences. Thanks to the TI ISO1640B device, it supports data transfer up to 1.7 MHz, and the power supply isolation via MPS MIE1W0505BGLVH eliminates ground loops and interference. Pololu 5393
zł37.08
24h
Available quantity: 4
Available
Module with 4-channel ADC ADS1015 converter. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 1083
zł50.28
24h
Available quantity: 6
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.4 A and features reverse voltage protection.
zł87.23
4 weeks
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5386