New products
New products New products
zł9,349.00
4 weeks
zł173.58
Delivery date unknown
Ideal Diode Reverse Voltage Protector - reverse voltage and current protection module 4-60V, 25A
ID: 1196546
5902186316690
zł31.25
Tax included
zł25.41 tax excl.
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389
Description
The Pololu Reverse Voltage Protector is a compact solution designed to protect connected loads from reverse voltage polarity of up to -60 V. By utilizing an ideal diode controller LM74700-Q1 and a MOSFET transistor, the device operates within a voltage range of 4 V (3.2 V after startup) to 60 V. When the voltage is correctly connected, the module allows free current flow. However, in the case of incorrect polarity, it blocks the voltage and protects the circuit from damage.
The device features an extremely low power path impedance of approximately 1.5 mΩ, enabling continuous current flow of up to 25 A and peak currents of up to 50 A for several seconds. The protection mechanism operates in a bidirectional manner, meaning the module not only blocks reverse input voltage but also prevents current backflow from the load to the power source.
The module includes large mounting holes that allow the connection of 14 AWG wires or the use of 5 mm pitch screw terminals. Additionally, smaller holes with a 2.54 mm pitch enable the soldering of standard pin headers. The bottom of the board also features pads for optional transient voltage suppression (TVS) protection, enhancing system resistance against sudden voltage spikes.
Features
- Input voltage: 4 V to 60 V (3.2 V after startup)
- Reverse polarity protection up to -60 V
- Current handling: up to 25 A continuous, up to 50 A peak
- Power path impedance: approximately 1.5 mΩ
- Prevents current backflow from the load to the power source
- Supports 14 AWG wires and 5 mm pitch screw terminals
- Soldering points for optional TVS protection
- Dimensions: 12.7 x 15.2 mm
1196546
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388
zł25.18
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5383
zł18.27
24h
Available quantity: 4
Available
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 00 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5382
zł13.97
24h
Available quantity: 5
Available
Other products in the same category (16)
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3142
zł225.57
4 weeks
No product available!
Pololu 4-Channel RC Servo Multiplexer (Partial Kit)
zł51.34
24h
Available quantity: 1
Available
Four-channel relay module equipped with optoisolated control inputs and JQC-3F relays with 5V coils. Designed for controlling loads up to 10A at 250VAC from a microcontroller or development platform
zł8.40
4 weeks
No product available!
Bipolar stepper motor driver operating at voltages from 8 to 50 V and currents up to 8 A/phase (11 A with cooling). The DRV8711 driver with an SPI interface offers 9 stepping modes (up to 1/256), current configuration, stall detection, and protection against short circuits, overloads, and reverse polarity. Compatible with 1.8–5 V logic, it is ideal for CNC machines, 3D printers, and robotics. Pololu 3731
zł108.28
4 weeks
No product available!
The Step-Down D24V3F3 Buck Voltage Regulator module gives the output voltage of 3,3V with a wide input voltage range of 4.3-42V and a maximum output current of 300 mA. Pololu 2097
zł33.54
24h
Available quantity: 2
Available
Module with relay HF152FD 16A. It allows you to control devices with a current consumption of up to 16A using a low-power signal. The module has a relay activation time of about 10ms. DFRobot DFR0251
zł47.32
4 weeks
No product available!
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 Voperating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation.
zł327.55
24h
Available quantity: 1
Available
Compact stepper motor controller with the TMC5160 system with operating voltage from 8 to 35 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via the SPI interface and is an ideal solution for 3D printers and similar applications. BIGTREETECH TMC5160 V1.3
zł56.30
24h
Available quantity: 40
Available
Pololu G2 18v15 High Power is a miniature DC motor controller. Power supply for the controller: 6.5 ... 30 V. Current efficiency of the module: 15 A. The module has protection against back voltage and overvoltages. Pololu 1363
zł551.54
4 weeks
No product available!
The audio level indicator module with screw connection is a versatile device that makes monitoring audio levels much easier while being easy to install and use.
zł83.84
24h
Available quantity: 3
Available
The USB Step-Up converter module in the housing allows you to adjust the voltage in the range of 3.5-15V to 0.5-30V, with a maximum current of 2A and a power of 15W. The device is characterized by high precision, voltage resolution 0.01V, current resolution 0.001A, voltage accuracy 0.3% and current accuracy 0.5%, and can operate in temperatures from -40°C to 85°C.
zł69.90
24h
Available quantity: 3
Available
The Step-Up converter module converts the voltage in the range of 3.5-30V to 4-30V with an efficiency of over 90% and a maximum power of 80W. Its compact dimensions (3.8 x 5.2 x 2cm) and wide operating temperature range (-40 - 85°C) make it ideal for many applications.
zł9.58
24h
Available quantity: 5
Available
Compact board for controlling RGB and white LED strips, allowing easy connection without the need for soldering. With WS2811F and N-channel FETs, it supports up to 3A of current per channel, making it ideal for high-current LED strips, but does not support RGBW strips. Adafruit 5888
zł25.58
24h
Available quantity: 1
Available
A step-down converter module that allows for input voltage reduction from 7.6-36V to a stable 7.5V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5595
zł11.94
24h
Available quantity: 5
Available
An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous current up to 1.1 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4972
zł15.94
24h
Available quantity: 2
Available
BMS protection circuit designed for 5 Li-Ion cells. It has a charging function with balancer option, a discharging function and an over-discharge protection function. HXYP-C47-MA18-5S
zł20.44
24h
Available quantity: 1
Available
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389