Reverse Voltage Protector - reverse voltage protection module 4-60V, 12A
ID: 1196553
5902186320895
zł16.41
Tax included
zł13.34 tax excl.
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5381
Description
The Pololu Reverse Voltage Protector is a compact solution designed to protect connected loads from reverse voltage polarity up to -60 V. By utilizing the LM74500-Q1 ideal diode controller and a MOSFET transistor, the device operates within a voltage range of 4 V (3.2 V after startup) to 60 V. When the voltage is correctly connected, the module allows free current flow; however, in the event of incorrect polarity, it blocks the voltage and protects the circuit from damage.
The device features a very low power path impedance (approximately 5 mΩ), enabling a continuous current flow of up to 12 A and a peak current of 40 A for short durations. This version does not block reverse current, making it suitable for applications such as battery-powered motor control, where energy recovery back to the power source is desirable.
The module includes large mounting holes that allow connection of wires or the use of 5 mm pitch screw terminals. Additionally, smaller 2.54 mm pitch holes are available for soldering standard pin headers. The bottom side of the board features pads for an optional transient voltage suppression (TVS) diode, enhancing system resilience against sudden voltage spikes.
Features
- Input voltage: 4 V to 60 V (3.2 V after startup)
- Reverse voltage protection up to -60 V
- Current capability: up to 12 A continuous, up to 40 A peak
- Power path impedance: approximately 5 mΩ
- Supports wires and terminals with 5 mm or 3.5 mm pitch
- Solder pads for optional TVS protection
- Dimensions: 7.6 x 12.7 mm
1196553
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389
zł31.70
24h
Available quantity: 5
Available
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388
zł24.22
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5387
zł31.22
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5386
zł23.37
Delivery date unknown
No product available!
Other products in the same category (16)
MP3 panel with a HiFi amplifier for installation in an audio device. It allows you to play files from USB memory, SD card, via the audio connector and Bluetooth. It has a built-in FM receiver
zł54.02
4 weeks
No product available!
Step-Down DC-DC converter module based on the D36V6F12 system. Input voltage 12.2.50V, output voltage 12V (max. 600mA). Pololu 3796
zł21.44
4 weeks
No product available!
4-channel SSR 240V / 2A relay module with fuse. modSSR-4CH
zł30.50
24h
Available quantity: 12
Available
The TPA3116DA 150W XH-M544 audio amplifier module is a compact device with a wide input voltage range (12-26V) and output power up to 150W (100W recommended), ensuring clear sound with a signal-to-noise ratio of 100dB. The small size (77 x 73 x 19mm) makes it an ideal choice for a variety of audio projects.
zł38.18
24h
Available quantity: 18
Available
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3142
zł225.57
24h
Available quantity: 1
Available
Powerful DC motor driver. It allows you to control a motor with a power supply voltage in the range of 6 ... 28 V, the motor can draw current of 100 A (using a heat sink). For the control PWM modeling (eg from RC receivers) is used in robotics, small electric vehicles or wherever there is a need to control a DC motor. Digilent 410-334-1
zł467.81
3 weeks
No product available!
The Step-Up Buck Voltage Regulator module with adjustable output voltage in range of 4-25V with a input voltage range of 1.5-16V and a maximum output current of 2A. Pololu 799
zł88.63
24h
Available quantity: 2
Available
Step-Down converter with an output voltage of 5 V, input voltage from 9 to 36 V and a maximum current of 5 A. The board is equipped with a DC input connector and an output USB connector
zł14.45
24h
Available quantity: 15
Available
DC-DC Step-up converter module based on the U3V70F5 system. Input voltage 2.9 ... 5V, output voltage 5V, maximum current 10A. Two mounting holes. Polol 2891
zł82.90
24h
Available quantity: 3
Available
The KAmod USB HID module with the CH9350 chip enables reliable extension of USB HID signals via UART transmission, offering stable connections over long distances. With built-in protection features, advanced LED indicators, and full system compatibility, the device is ideal for industrial applications, embedded systems, and advanced control setups using standard HID devices.
zł77.90
24h
Available quantity: 99
Available
Brushless motor driver module (ESC regulator) with current efficiency up to 30 A
zł45.02
4 weeks
No product available!
This powerful step-up/step-down regulator efficiently produces an adjustable 4 V to 12 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%.
zł124.54
4 weeks
No product available!
I2C FRAM breakout board you can add some FRAM storage to your next DIY project. FRAM allows for a lower power usage and a faster write performance. Adafruit 1895
zł49.89
24h
Available quantity: 2
Available
A module with a 16-channel input/output port expander controlled by an I2C interface. It was based on the MCP23017 chip and equipped with a Gravity connector. DFRobot DFR0626
zł27.22
24h
Available quantity: 2
Available
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 9 V and a maximum input of up to 2 A. Pololu 4944
zł25.45
24h
Available quantity: 8
Available
Available
The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5381