Class A power amplifier with one channel (mono) with the power of 10 W. Built on the popular design of J. Hood from 1969

Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CC-0300-Y

Module with EEPROM memory, capacity 512 kbit (64kB). Communication takes place via the I2C interface. The module has 3 jumpers that enable selection of one of 8 addresses. SparkFun SPX-14764

Converter dedicated to industrial applications. It provides communication between the USB interface and the RS232 and RS485 serial standard

Mini Tamiya Plug with 10cm Leads, Male

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0150-G

Module with active low-pass filter. Dedicated to the bass column (subwoofer)

SDDR DDR3 2Gb, 1.5V memory

Pololu 4812 is a set of two JST SH 3-pin top-entry adapters that facilitate integration of JST SH wires with breadboards and prototype circuits. Thanks to compatibility with the 2.54 mm pitch and support for voltages up to 50 V, the adapters are useful in prototyping power and signal circuits.

LCD 2x16, 53x20mm SMALL, LED backlight (WHITE) NEGATIVE BLUE, STN, enhanced temperature range, ZIFF connector for FCC tape, 3.15mm character

Pololu 4814 is a set of two JST SH 4-pin top-entry adapters that allow easy integration of JST SH wires with breadboards and prototype boards. With support for voltages up to 50 V and currents up to 1 A per pin, these adapters are suitable for a wide range of applications in electronics and automation.

STM32G051F8P6, 32 Bit Microcontroller, ARM Cortex-M0+, TSSOP20

Two-channel DC motor driver based on the HR9933 circuit. It allows you to control the movement of drives with a supply voltage of up to 10 V and power consumption up to 1.5 A. DFRobot DRI0040

The LCD2004 Blue I2C display offers four lines of 20 characters, with LED backlight and simplified connection thanks to the I2C converter. The use of the I2C interface allows saving microcontroller pins, which is especially important in projects with limited hardware resources. Ideal for information systems, user panels and any devices requiring extensive display of text information

The Bourns SRP7028A-4R7M Power Inductor is a 4.7uH, 20% tolerance SMD component designed for automotive and industrial applications, compliant with AEC-Q200 standards. The compact 7 x 7 x 2.8mm size and low DC resistance provide efficiency and stability in power converters, while the robust design ensures resistance to high temperatures and current overloads.

OV5647 Camera Board /w M12x0.5 mount Lens fully compatible with Raspberry Pi. ArduCAM B0031

Suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc. SEN0207

Finder 26.02.8.230.0000 is a pulse (bistable) relay equipped with two normally open (DPST-NO) contacts, with a 10 A load capacity and a maximum switching voltage of 400 V AC. Powered by a 230 V AC coil voltage, it is designed for mounting in an installation box, facilitating integration into building automation systems.

STM32L4S9VIT6, Ultra-low-power with FPU ARM Cortex-M4 MCU 120 MHz with 2048 kbytes Flash, USB OTG, DFSDM, LCD-TFT, MIPI DSI, AES-256, HASH, LQFP-100

MMA8653FC, 3-Axis 10-bit Digital Accelerometer, DFN-10