Mini Tamiya Plug with 10cm Leads, Male
This connector, a smaller version of the male Tamiya plug, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male mini Tamiya connector has 10 cm 18-AWG leads with stripped and tinned terminations.
This connector with leads makes a great power cable. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected.
This is the male version of the connector (we also offer a matching female version). Two 10 cm 18-AWG wires are crimped inside the connector housing. The leads have silicone insulation and stripped, tinned terminations. As an alternative, we sell a mini Tamiya connector pack that includes housings and crimp pins you can use to attach these male connectors to your own wires.
Note: these connectors are sometimes referred to as “female” in the RC hobby industry, so please look at the connector picture below carefully to make sure it is what you want.
|
|
![]() |
| Male mini Tamiya plug dimensions (in mm). |
|---|
Note: This connector is also available in the larger Tamiya version.
![]() |
Mini Tamiya Plug with 10cm Leads, Female |
![]() |
Tamiya Plug with 10cm Leads, Male |
![]() |
Tamiya Plug with 10cm Leads, Female |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
SATA III to USB 3.0 adapter. It allows you to connect a 2.5" HDD, 3.5" HDD or SSD to a computer via USB. The angle joint facilitates assembly
No product available!
A 7-pin cable with a length of 30 cm, terminated on one side with a Molex Picoblade 1.25 mm plug
RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01
2m RS-232 D-Sub (f) / D-Sub (f) cable, uncrossed. Akyga AK-CO-04
SATA III to USB 3.0 adapter. It allows you to connect a 2.5" HDD, 3.5" HDD or SSD to a computer via USB. Comes with a 12 V power supply
No product available!
Flexible extension for a microSD card with a length of 25 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC.
No product available!
High-quality cable equipped with a standard RS232 connector with a DB9 socket and an RJ45 connector. Provides the ability to connect devices with an RJ45 connector to a computer for debugging and communication via the serial port. Waveshare RS232-TO-RJ45-Console-Cable
Cable with ESLOV connector, 50 mm long. Allows you to connect two ESLOV boards together or use the ESLOV to Qwiic adapter. SparkFun CAB-24012
RS-232 D-Sub (m) / D-Sub (m) cable 2 m long, uncrossed. Akyga AK-CO-03
Flexible 25 cm microSD to SD adapter. Supports all card capacities and types including: 16GB, 32GB, 64GB, 128GB Micro SD/SDHC
No product available!
Flexible adapter for microSD to SD card with a length of 25 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC.
No product available!
Pmod cable set consisting of a 2x6 pin adapter to a double 6 pin connector and a 2x6 pin extension cable. Digilent 240-021-12
No product available!
Cables dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun KIT-19627
No product available!
B6 charger cable with all the most popular connectors used in batteries
No product available!
OBD-II cable serving as a splitter and extension cable, approximately 1 meter long. Connects all 16 pins between each connector, which eliminates diagnostic problems. SparkFun CAB-25070
No product available!
AUX cable of 2metres length featuring a durable and reliable M8 straight male connector on both ends, allowing you to easily connect to our Series 2 PoE devices.
No product available!
Mini Tamiya Plug with 10cm Leads, Male