50cm microSD to SD card adapter

2m RS-232 D-Sub (f) / D-Sub (f) cable, uncrossed. Akyga AK-CO-04

15 cm long cable with plug and XT60 socket. It allows you to connect a battery with an XT60 socket, e.g. to a charger

Adapter from 16-pin OBD2 connector to DB9 connector on a 100 cm long cable

Yellow 6-core connecting cable, 30 cm long. Intended for use with Kamami KAmod modules. It is terminated on both sides with a red plug that fits the WF06S connector. CAB_HU06-30-YELLOW

A 7-pin cable with a length of 30 cm, terminated on both sides with a Molex Picoblade 1.25 mm plug

High-quality cable equipped with a standard RS232 connector with a DB9 socket and an RJ45 connector. Provides the ability to connect devices with an RJ45 connector to a computer for debugging and communication via the serial port. Waveshare RS232-TO-RJ45-Console-Cable

Cable with ESLOV connector, 50 mm long. Allows you to connect two ESLOV boards together or use the ESLOV to Qwiic adapter. SparkFun CAB-24012

SATA III to USB 3.0 adapter. It allows you to connect a 2.5" HDD, 3.5" HDD or SSD to a computer via USB. The angle joint facilitates assembly

Pmod cable set consisting of a 2x6 pin adapter to a double 6 pin connector and a 2x6 pin extension cable. Digilent 240-021-12

The cable is terminated on both sides with a 1.25mm-7P plug. Length 30cm

RS-232 D-Sub (m) / D-Sub (m) cable 2 m long, uncrossed. Akyga AK-CO-03

B6 charger cable with all the most popular connectors used in batteries

OBD-II cable serving as a splitter and extension cable, approximately 1 meter long. Connects all 16 pins between each connector, which eliminates diagnostic problems. SparkFun CAB-25070

Cable dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun CAB-19244

Flexible extension for a microSD card with a length of 25 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC.