Akyga AK-CO-04 - RS-232 D-Sub (f) / D-Sub (f) 2m cable

Cables dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun KIT-19627

High-quality cable equipped with a standard RS232 connector with a DB9 socket and an RJ45 connector. Provides the ability to connect devices with an RJ45 connector to a computer for debugging and communication via the serial port. Waveshare RS232-TO-RJ45-Console-Cable

Yellow 6-core connecting cable, 30 cm long. Intended for use with Kamami KAmod modules. It is terminated on both sides with a red plug that fits the WF06S connector. CAB_HU06-30-YELLOW

Flexible extension for a microSD card with a length of 25 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC.

SATA III to USB 3.0 adapter. It allows you to connect a 2.5" HDD, 3.5" HDD or SSD to a computer via USB. Comes with a 12 V power supply

RS-232 D-Sub (m) / D-Sub (m) cable 2 m long, uncrossed. Akyga AK-CO-03

A 7-pin cable with a length of 30 cm, terminated on one side with a Molex Picoblade 1.25 mm plug

10 cm long cable with plug and XT60 socket. It allows you to connect a battery with an XT60 socket, e.g. to a charger

Cable with ESLOV connector, 50 mm long. Allows you to connect two ESLOV boards together or use the ESLOV to Qwiic adapter. SparkFun CAB-24012

Adapter from 16-pin OBD2 connector to DB9 connector on a 100 cm long cable

SATA III to USB 3.0 adapter. It allows you to connect a 2.5" HDD, 3.5" HDD or SSD to a computer via USB. The angle joint facilitates assembly

OBD-II cable serving as a splitter and extension cable, approximately 1 meter long. Connects all 16 pins between each connector, which eliminates diagnostic problems. SparkFun CAB-25070

USB - RS-232 USB A (m) / D-Sub (m) cable with a length of 1 m. Akyga AK-CO-02

Seeed Studio 321010822 is a magnetic USB Type-A to 2P cable designed for charging SenseCAP T1000-A and T1000-B trackers. Its magnetic design simplifies daily use, providing a fast and reliable connection while ensuring convenience and safety.

The cable is terminated on both sides with a 1.25mm-7P plug. Length 30cm

A 7-pin cable with a length of 30 cm, terminated on both sides with a Molex Picoblade 1.25 mm plug