Isolated DC-DC power module designed for safe powering of sensitive electronic circuits, offering galvanic isolation up to 3kVRMS, 5V or 5.5V output voltage, and output current up to 300mA. Pololu 5414

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5251

UART-RS485 converter module. It enables communication of Arduino boards with industrial modules. DFRobot DFR0259

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19036

Module with a reflection sensor (line sensor) RS-06WD. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020172

Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection class IP65 (waterproof)

Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21

Module with DC motor driver DRV8874. It can work with motors supplied with the voltage from 4.5 to 37 V and current consumption up to 2.1 A. Pololu 4035

Module with DC motor driver DRV8876. It can work with motors supplied with the voltage from 4.5 to 37 V and the current consumption up to 1.3 A. Pololu 4036

Ethernet MQTT communication module designed for M5Stack sets. It communicates via the UART interface using AT commands. M5Stack U129

Lanberg\'s Cat.6 patch cord with a length of 10 meters ensures efficient data transmission up to 250 MHz thanks to F/UTP shielding and is made of copper-plated material (CCA). The green cable with a diameter of 5.7 mm is resistant to interference and confirmed by the Fluke test. Lanberg PCF6-10CC-1000-G

Module with e-Paper display, 3.52" diagonal and 360x240 px resolution. Communication via SPI interface. Waveshare 3.52inch e-Paper HAT

A computer performance monitor that allows you to display CPU, GPU, RAM and disk usage. It has a built-in microphone and an audio spectrum display function. It is connected to the computer via a USB port. Waveshare 4inch USB Monitor W

Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CC-0100-O

A class-D audio amplifier designed for the Pimoroni Yukon platform, offering up to 25W of mono output. The module allows for connection to speakers with an impedance of 4Ω or greater and delivers clean, dynamic sound thanks to the TAS2780 chip. Equipped with a temperature sensor and screw terminals, it\'s ready to use, no soldering required. Pimoroni PIM689

Speech recognition module with Nuvoton ISD9160 system, microphone, Flash memory and speaker output. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020232

Module with OV5647 sensor cooperating with ODROID-M1. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. Odroid M1 MIPI-CSI Camera Kit

4-color e-Paper display with a diagonal of 1.64" and a resolution of 168x168 px. Communicates via the SPI interface. Without a PCB. Waveshare 1.64inch e-Paper (G)

Module with ToF VL53L4CX sensor with a range of up to 6 m. It is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 5425

Module with the driver of the resistive touch panel. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5423