Module with an EMG signal detector. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020058

Module with a digital temperature and humidity sensor based on the SHT35. Communication via the I2C interface. DFRobot SEN0333

Waterproof NeoPixel tape with RGB LED diodes with a length of 2 m, 60 LEDs per meter, diodes are mounted on an elastic PCB in black. Adafruit 1376

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-1000-G

5" LCD TFT display with touch screen. The display is equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (G)

Monochrome OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. The display has a built-in SSD1306 controller, communication via the I2C interface. DFRobot DFR0647

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-1000-B

The Step-Down D24V3AHV Buck Voltage Regulator module with adjustable output voltage in the range of 4-25V with a wide input voltage range of 4.5-42V and a maximum output current of 300 mA. Pololu 2102

A small module with a PAJ7620U2 gesture detection sensor. Can recognize up to 13 gestures. Communication via the Gravity I2C interface. DFRobot SEN0315

Pololu Micro Serial Servo Controller (partial kit)

This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. SEN-13332

LCD IPS module with a screen diagonal of 2" and a resolution of 320x240 pixels. The display has a built-in ST7789V driver and communicates via the SPI interface. The display can also work via the GDI port. DFRobot DFR0664

LCD IPS module with a screen diagonal of 1,54" and a resolution of 240x240 pixels. The display has a built-in ST7789 driver and communicates via the SPI interface. The display can also work via the GDI port. DFRobot DFR0649

Module with an ambient oxygen concentration sensor. The system allows you to measure the oxygen volume in the range up to 25% with a resolution of 0.15%. The module communicates via the I2C interface. DFRobot SEN0322

Professional pH measurement set with an industrial silver chloride electrode (Ag/AgCl), the measurement in the range from 0 to 14 pH is converted into voltage with a linear characteristic. DFRobot SEN0169-V2

Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335

The camera module with the Sony IMX219 sensor works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0152

The camera module with the Sony IMX219 sensor with motorized IR filter. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0154

7.9" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 400x1280 pixels. Waveshare 7.9inch HDMI LCD

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0500-R