The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5387

The 24C02CT-I/ST is a low-voltage, energy-efficient 2 kbit EEPROM memory with an I²C interface, optimized for reliable storage of configuration data in industrial, consumer, and embedded applications. Its TSSOP-8 package and long data retention make it suitable for integration into compact electronic systems.

STM32L552RET6, Ultra-low-power with FPU Arm Cortex-M33 with Trust Zone, MCU 110 MHz with 512 kbytes of Flash memory, LQFP64

Two-channel driver of direct current (DC) motors with an operating voltage from 4 to 16 V and a maximum continuous current of 3 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD3A

GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports the RTK function as a base station. Waveshare LC29H(BS) GPS/RTK HAT

Class-D mono audio amplifier module based on the MAX98357 chip. It can work with a 4 to 8 ohm speaker of up to 2.5 W and communicates via an I2S interface. DFRobot DFR0954

Micro HDMI adapter with FFC connector. Designed for prototyping devices with HDMI interface. Waveshare Micro HDMI Adapter Horizontal (B)

Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 6 V and a maximum input of up to 2 A. Pololu 4942

A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5230

LCD 4x16, 87x60mm, LED backlight (white), FSTN positive, enhanced temperature range, Pb-free

10-pin male angled 2.54mm pitch PCB connector for IDC plug, RoHS

LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 410 to 525 MHz. Waveshare RP2040-LoRa-LF

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0025-B

Single-channel SuperSpeed USB 3.0 driver from NXP in the X2QFN12 housing. The 1.8V system supports data rates up to 5 Gbit / s. NXP PTN36221AHXHP

4.3inch serial interface electronic paper display

1A, 97% Efficiency, 30µA Quiescent Current Step-Up Converter with True Shutdown, tdfn10-ep, Maxim Integrated, RoHS

SanDisk Extreme microSDXC 64GB V30 Memory Card. Designed for intensive use in harsh conditions, perfect for video monitoring, drones, action cameras, professional cameras, and telemetry systems, offering fast data writing speeds of up to 90 MB/s

Compact and efficient module designed for precise control of bipolar stepper motors, offering microstepping down to 1/32 step and maximum current up to 2 A in peak mode. Thanks to advanced features such as QuietStep (APFD) algorithm, built-in protections and pin compatibility with A4988, it is perfect for hobby, educational and industrial projects. Blue Edition version with four-layer board and 2 oz copper provides better heat dissipation, increasing reliability of operation even at higher loads. Pololu 5340

The Finder 40.62.7.024.4000 electromagnetic relay is a reliable DPDT type component, operating on a voltage of 24VDC, capable of switching loads up to 10A at 250VAC, ideal for automation and control systems. Thanks to the double-track contact construction and high insulation between the coil and contacts (4000 V AC), the relay provides independent control of two circuits, guaranteeing long life and stable operation. Finder 40.62.7.024.4000