KAmod RPI Pico Protoboard - prototyping board for Raspberry Pi Pico

The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver

A set of goldpin male connectors intended for Raspberry Pi Pico boards. The set includes two 20-pin strips and one 3-pin strip with a pitch of 2.54 mm. Soldered connectors enable easy connection of expansion modules and other accessories

A base board that allows the Raspberry Pi Pico to control four DC motors or two stepper motors and eight servos, offering great flexibility for robotic projects. The board is equipped with dual H Bridge ICs to drive the motors, with full direction control and stopping functions, and power supplied via a terminal or servo connector, which increases its functionality. Additionally, thanks to the regulated 3.3V voltage, there is no need for a separate power supply for the connected Raspberry Pi Pico, simplifying the assembly process and integration with other devices. Kitronik 5329

Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor

Board with prototype holes dedicated to Raspberry Pi Pico. It offers an 8x20 hole area with a pitch of 2.54 mm with marked pin labels and a reset button and STEMMA QT connector. Adafruit 5200

Shield with two relays for Raspberry Pi Pico, provides control of devices up to 250 VAC/3 A or 30 VDC/3 A, equipped with LEDs indicating the status of the relays and opto-isolation, ideal for home automation and other DIY projects

Module with PMSA003 air quality sensor and BME280 pressure sensor designed for Raspberry Pi Pico. It is equipped with WiFi ESP8266 communication. SB Components 22342

A compact board that allows you to control up to 8 servos simultaneously, making it ideal for advanced robotic projects. Equipped with standard 3-pin connectors, it allows you to easily connect servos without soldering, and additional GPIO pins and a 3V power supply from Pico allow you to expand your projects with new devices. The board\'s power supply is stabilized, and additional features such as an on/off switch and reverse polarity protection increase its safety and convenience of use. Kitronik 5339

Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468

Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Pimoroni PIM630

Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio

Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635

A module with a barcode and QR scanner designed to work with the Raspberry Pi Pico. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. SB Components 22441

Uninterruptible power supply module for Raspberry Pi Pico, which allows you to continue work and safely shut down the microcomputer after a power failure. Waveshare Pico-UPS-A-EN

Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM627

2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 120 V AC or 24 V DC and currents up to 2 A. SB Components 21376