Module with a digital distance sensor with a range of up to 50 cm. It has a digital output that goes low when an object is detected. Pololu 4067

Finder 34.51.7.012.4010 is an ultra-slim electromagnetic relay with a width of 5 mm, featuring a single changeover contact (SPDT) and a 12 V DC coil. This relay has a maximum switching current of 6 A and low coil power consumption of 170 mW, making it suitable for applications in confined spaces on printed circuit boards.

Module with 7 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4447

Module with 15 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020172

Monochrome OLED display with a diagonal of 1.3" and a resolution of 128x64 pixels. It has a built-in SH1106 controller, communication via the SPI interface. Pololu 3760

Module with a digital distance sensor with a range of up to 100 cm. It has a digital output that goes low when an object is detected. Pololu 4069

Module with a UV light sensor LTR390-UV. It allows you to measure the intensity of ultraviolet radiation and visible light. It communicates via the I2C interface. Waveshare UV Sensor (C)

Thermal printer designed for printing receipts, barcodes, bitmap graphics and QR codes. It communicates via the USB/TTL/RS232 serial interface, it can be operated e.g. by Arduino

Finder 38.52.7.024.0050 is a relay interface module with a 24 V DC coil, equipped with two changeover contacts (DPDT) with a load capacity of 8 A. It is designed for DIN rail mounting and features screw terminals for easy installation.

Module with a digital distance sensor with a range of up to 200 cm. It has a digital output that goes low when an object is detected. Pololu 4077

Programmable radio module operating at 2.4 GHz. It is based on the CC2511F32 microcontroller. The board has analog outputs, PWM, USART and SPI interfaces and a USB connector. Pololu 1336

Module with a distance sensor with a range of up to 300 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4079

Akyga® AK-USB-56 cable with angled Lightning connector is a universal and durable solution for fast charging and data synchronization in Apple devices. With a length of 1 meter, durable braided sleeve, and aesthetic finish, it is an ideal everyday accessory for iPhones and iPads, offering convenience and safe use in any situation.

Module with 25 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4125

Module with 7 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4147

ARM®-based 32-bit MCU, up to 32 KB Flash, crystal-less USB FS 2.0, CAN, 8 timers, ADC & comm. interfaces, 2.0 - 3.6 V, TSOOP20, STM, RoHS

Finder 99.02.0.024.59 is an LED indicator module with a green diode, designed for use with coils operating at 6–24 V AC/DC, providing visual indication of the relay status. It is compatible with sockets from series 90, 92, 94, 95, 96, and 97, making it a versatile solution for various industrial applications.

Extension module dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 3211

The LCD-CC-2002Ax-VIW W/KKK-E6 C is an advanced display module with a resolution of 2x20 characters, featuring NEGATIVE PURE BLACK LED backlighting, ensuring excellent contrast and readability of displayed content. With its extended "fast" temperature range, it is an ideal solution for applications in harsh environmental conditions. The standard 20x2 LCD layout and availability of a character table make it easy to integrate with various systems and applications.

Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 1.2 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-3AMOTOR