![Mini thermal printer Mini thermal printer](https://kamami.pl/40785-large_default/mini-thermal-printer-usb-ttl-rs232.jpg)
![Mini thermal printer Mini thermal printer](https://kamami.pl/40785-large_default/mini-thermal-printer-usb-ttl-rs232.jpg)
zł138.13 tax excl.
Thermal printer designed for printing receipts, barcodes, bitmap graphics and QR codes. It communicates via the USB/TTL/RS232 serial interface, it can be operated e.g. by Arduino
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A small thermal printer designed for printing receipts, barcodes, bitmap graphics and QR codes. It uses paper that is approximately 57 mm in diameter, which is commonly available at office supply stores. It communicates via the USB/TTL/RS232 serial interface, so it can work with Windows XP, 7, 8, 10, Linux and Android devices. The printer can also be operated by boards with TTL interface, eg Arduino. To power the device, you need a power supply with an output voltage range from 5 V to 9 V and a capacity of 2 A.
Attention!
Cable with USB plugs type A and mini-USB type B, cable with a length of 1.8 m
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Kit with Raspberry Pi computer built into the keyboard. Equipped with a power supply, mouse, HDMI cable and 16 GB microSD card. Raspberry Pi 400 Personal Computer Kits
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
NP330N print server designed to share printers on a computer network. Thanks to WiFi support, the print server allows for a wireless connection to a computer network, eliminating the need to run Ethernet cables. NP330-WiFi
Adafruit 600 - Mini Thermal Receipt Printer Starter Pack
No product available!
Thermal printer designed for printing receipts, barcodes, bitmap graphics and QR codes. It communicates via the USB/TTL/RS232 serial interface, it can be operated e.g. by Arduino