SHIELD-3AMOTOR DC Motor Driver Shield 1,2A 7V-30V - 2-channel DC motor driver for Arduino
ID: 587225
5906623405541
zł111.29
Tax included
zł90.48 tax excl.
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 1.2 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-3AMOTOR
Description
Shield with two-channel DC motor driver designed for Arduino boards, which can be used as a stepper motor driver. It allows you to control the movement of motors with a supply voltage from 7 to 30 V and a current consumption of up to 1.2 A (continuous current). The control can be done via the PWM signal or using the built-in buttons and switches, which allow very easy testing of the drives without the need to connect a controller. The module can work with 3.3 V and 5 V systems, making it compatible with all popular development boards that have a pin spacing compatible with the Arduino Uno. In the GitHub repository, the Arduino library is available along with the user manual.
Features
- Dual-channel DC motor driver
- The motor supply voltage is from 7 V to 30 V
- Maximum continuous current up to 1.2 A and peak 3 A
- Control voltage 3.3 V or 5 V
- Screw connection for connecting power and motors
- Control buttons
- Arduino compatible connector
- Connector for connecting line sensors
- Dimensions: 68.58 x 53.34 mm
587225
Data sheet
- Output current
- 1,2 A
- Number of channels
- 2
- Supply voltage min
- 7
- Supply voltages max
- 30 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 20
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
The board is compatible with Arduino, based on the ATmega328P microcontroller from the AVR family, 14 I/O lines, 6 PWM channels, 6 analog inputs are available to the user. The CH340G chip communicates via a USB interface. In addition, it has 12 LEDs, a programmable button and a embedded buzzer. Cytron Uno Maker
zł36.62
24h
Available quantity: 5
Available
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-MDD10
zł119.00
24h
Available quantity: 1
Available
Shield with DC motor driver for Arduino. It has an operating voltage of 7 to 30 V and a maximum continuous current of 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-MD10
zł59.91
24h
Available quantity: 7
Available
Board compatible with Arduino, based on ATmega328P. Equipped with an area with prototype holes, a breadboard, 12 LEDs, a button and a buzzer. Cytron MAKER-UNO-X
zł57.75
24h
Available quantity: 3
Available
Other products in the same category (16)
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-MDD10
zł119.00
24h
Available quantity: 1
Available
DC motor controller that allows the movement of three drives to be controlled via an I2C interface. Board with soldered connectors included. Pololu 5068
zł152.37
24h
Available quantity: 2
Available
Two-channel DC motor driver designed to work with Arduino boards. The module is based on the H L298 bridge system. It can control two DC motors up to 2 A per channel. SparkFun DEV-14129
zł145.74
3 weeks
No product available!
DC motor controller that allows the movement of three drives to be controlled via an I2C interface. A board without connectors is included. Pololu 5070
zł106.27
24h
Available quantity: 2
Available
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. Pololu 2507
zł294.77
4 weeks
No product available!
This Kit with fully-dedicated PWM driver chip handles all the motor and speed controls over I2C. Only two data pins (SDA & SCL in addition to the power pins GND & 5V) are required to drive the multiple motors; you can also connect any other I2C devices or shields to the same pins. This makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3. Adafruit 1438
zł102.94
24h
Available quantity: 3
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5044
zł574.14
4 weeks
No product available!
(DRI0009) 2A Motor Shield For Arduino
zł91.24
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5040
zł327.65
4 weeks
No product available!
Quad DC Motor Driver Shield is an Arduino compatible DC motor driver that allows you to control 4 DC motors with a voltage between 2.5 ... 13.5V and up to 1.2A. DFRobot DRI0039
zł62.26
24h
Available quantity: 1
Available
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Arduino tiles. The motor can be supplied with 6.5 ... 30V voltage and can draw up a maximum current of 22A. Polol 2517
zł598.99
4 weeks
No product available!
Pololu Dual MC33926 Motor Driver Shield for Arduino
zł197.80
24h
Available quantity: 2
Available
An Arduino extension that allows you to simultaneously control four DC motors, two stepper motors, or two 5V servos. It uses an L293D chip, which provides stable operation and a current of up to 1.2A per channel at motor voltages of 4.5-12V. An 8-stage shift register reduces the number of pins needed for control, allowing for more efficient use of microcontroller resources. Elecrow Four Channels Motor Shield
zł10.92
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5036
zł352.15
4 weeks
No product available!
Pololu - 2511
zł41.29
24h
Available quantity: 1
Available
Expansion board for three stepper motor drivers compatible with Arduino Nano. The stepper driver connectors fit A4988 modules
zł13.69
24h
Available quantity: 4
Available
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 1.2 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-3AMOTOR