Suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc. SEN0207

The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476

Module with 6-digit 7-segment LED display. The board is equipped with a TM1637 driver and communicates via a digital interface

Module dedicated to Raspberry Pi, which supports various wireless communication modes, such as LTE-TDD, LTE-FDD, GSM, GPRS and EDGE. With download speeds of up to 10Mbps and upload speeds of up to 5Mbps, this module is perfect for IoT applications such as remote information processing, device monitoring, POS terminals, industrial routers, remote diagnostics and satellite positioning. Waveshare A7670E Cat-1/GNSS HAT

Laser dust sensor is a digital universal particle concentration sensor,it can be used to obtain the number of suspended particulate matter in a unit volume of air within 0.3 to 10 microns, namely the concentration of particulate matter, and output with digital interface, also can output quality data of per particle. DFRobot SEN0177

A 20x15 mm knob with an internal diameter of 6 mm. For mounting on a potentiometer or rotary encoder

IPS LCD display with a diagonal of 6.25" and a resolution of 720x1560 pixels. It uses an HDMI connector for image transmission and has a built-in capacitive touch panel controlled via a USB Type-C connector. It is dedicated to users of Raspberry Pi, NVIDIA Jetson Nano minicomputers and PCs. Waveshare 6.25 inch 720x1560 LCD

Compact ESP32 based board designed for lighting and WLED projects, offering WiFi, Bluetooth and efficient power supply via USB Type-C (up to 4A). It offers two LED outputs with logic level conversion, a built-in I2S microphone, STEMMA QT port, button, NeoPixel and additional GPIO pins. With support for multiple platforms (Arduino, MicroPython, CircuitPython, ESP-IDF), it is ideal for wearable devices and interactive projects. Adafruit 6160

Module with 4-digit 7-segment LED display. The board is equipped with a TM1637 driver and communicates via a digital interface

Switch module with a maximum voltage of 40 V and a current of 10 A, based on a MOSFET transistor, HT0740 driver and I2C expander. It has a screw connection and a status LED. Pimoroni PIM455

Module with 117x7 LED matrix display (77 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM442

Lanberg is a high-quality audio cable with 3.5mm Mini-jack and RCA plugs that provides excellent stereso sound transmission and is compatible with a wide range of devices, chcracterized by resistance to interference and minimal self-noise. Lanberg CA-MJRC-10CC-0015-BK.

A 20x15 mm knob with an internal diameter of 6 mm. For mounting on a potentiometer or rotary encoder

The module is equipped with eight 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. The board recommended for use with Arduino enables the control of eight relays using only two microcontroller lines. ICSTATION ICSE014A

Module with the HR1124S DC motor controller with a maximum current of 1.2 A. It can be powered with the voltage from 1.8 V to 6.8 V and is controlled by two PWM signals

A module with a 3-channel ADC ADC ADS1015, which allows you to read voltages from -24 V to +24 V with a sampling frequency of up to 3.3 kHz and a resolution of 12 bits. Pimoroni PIM422

Module with encoder and RGB backlight. It has an unlimited range of motion and is perfect for e.g. lighting control. Pimoroni PIM522

Module with 8-digit 7-segment LED display. The board is equipped with a 74HC595 driver and communicates via a digital interface