HT0740 40V/10A Switch Breakout - 40V/10A switch module with MOSFET transistor
ID: 585251
zł79.06
Tax included
zł64.28 tax excl.
Switch module with a maximum voltage of 40 V and a current of 10 A, based on a MOSFET transistor, HT0740 driver and I2C expander. It has a screw connection and a status LED. Pimoroni PIM455
Description
Digital switch module with a maximum voltage of 40 V and a current of 10 A, based on MOSFET HT0740 and TCA9554A expander. It communicates via the I2C bus and is supplied with the voltage from 3 to 5 V. It has a screw connection and a status LED. Documentation with a library and examples in Python is available in the GitHub repository.
Features
- MOSFET HT0740 driver chip
- I2C TCA9554A expander circuit
- MOSFET TPN2R304PL
- Bright white status LED
- Can switch up to 40V / 10A (DC only)
- Fully insulated
- Screw clamps
- Reverse polarity protection
- Compatible with all Raspberry Pi models with 40-pin and Arduino connectors
- I2C interface
- I2C address: 0x38 - 0x3B
- Supply voltage: 3 to 5 V
- Dimensions: 32 x 21 x 12 mm
Kit contains
- HT0740 Breakout
- 1x5 male header
- 1x5 female right angle header
585251
Data sheet
- Output current
- 10A
- Number of channels
- 1
- Executive element
- MOSFET
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.97
Delivery date unknown
No product available!
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 228
Available
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł4.90
24h
Available quantity: 43
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł249.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł338.00
24h
Available quantity: 21
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł525.00
24h
Available quantity: 28
Available
Other products in the same category (16)
No product available!
Module with 5V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.
zł13.62
24h
Available quantity: 1
Available
Module with a 12 V relay and a timer. It allows you to turn the device on and off cyclically at a specified time using potentiometers. It can also operate in single trigger mode, which allows the device to be turned on after a signal has been applied for a specified period of time. The operating time can be adjusted from 1 s to 100 s or from 1 s to 15 min
zł14.55
24h
Available quantity: 1
Available
Module with 24V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.
zł13.60
24h
Available quantity: 5
Available
12V relay module with a radio receiver in a set with a remote control operating at 433 MHz.
zł34.08
4 weeks
No product available!
Module with MOSFET and a Gravity connector. It allows you to easily connect and control the voltage from 5V to 30V and the current up to 2.5A. DFRobot DFR0643
zł37.86
24h
Available quantity: 1
Available
Module with 4 relays JZC-11F with a load of 5A. It enables switching devices with high power using a microcontroller. I2C communication. SparkFun COM-16566
zł170.59
24h
Available quantity: 1
Available
Module with relay HF152FD 16A. It allows you to control devices with a current consumption of up to 16A using a low-power signal. The module has a relay activation time of about 10ms. DFRobot DFR0251
zł47.32
4 weeks
No product available!
Module with 2 relays controlled by the I2C interface. Each relay can switch currents up to 25 A at 12 to 280 V AC. SparkFun COM-16810
zł901.07
3 weeks
No product available!
Module with a relay and WiFi communication. Compatible with ESP-01 or ESP-01S
zł9.32
24h
Available quantity: 6
Available
Module with SSR M281 relay with a load of up to 1 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 101020603
zł31.92
24h
Available quantity: 1
Available
Module with 4 relays SRD-05VDC-SL-C with a load up to 10 A. The board was equipped with a Grove connector and communicates via I2C. Seeed Studio 103020133
zł66.79
4 weeks
No product available!
Module with 2 relays SRD-05VDC-SL-C with a load up to 10 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020132
zł46.59
24h
Available quantity: 1
Available
Module with 8 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 103020136
zł446.91
4 weeks
No product available!
Module with 2 relays SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital inputs. Seeed Studio 103020134
zł188.52
24h
Available quantity: 2
Available
Module with relay SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital input. Seeed Studio 103020137
zł87.59
4 weeks
No product available!
Switch module with a maximum voltage of 40 V and a current of 10 A, based on a MOSFET transistor, HT0740 driver and I2C expander. It has a screw connection and a status LED. Pimoroni PIM455