zł38.47 tax excl.
Module with relay HF152FD 16A. It allows you to control devices with a current consumption of up to 16A using a low-power signal. The module has a relay activation time of about 10ms. DFRobot DFR0251
Module with the relay HF152FD 16 A. It allows you to control devices with a current consumption of up to 16 A using a low power signal. The module has a relay activation time of approx. 10 ms. It can be used to control e.g. lighting or electrical devices such as solenoid valves and motors. On the Wiki page there is a connection manual and sample programs.

Manufacturer
Responsible person
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
Board with ATmega1280 microcontroller from the AVR family, the user has 54 I/O lines, 14 PWM channels, 16 analog inputs. DFRobot DFR0003
No product available!
Set of 10 cables, 30 cm long, for digital sensors compatible with the Gravity standard. DFRobot FIT0011
Module with 8 digital inputs and 4 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8024ADAM
AO3406 MOSFET transistor module with N channel and JST PH2.0 connector designed to control motor, solenoid or LEDs. Adafruit 5648
Module with eight 240V/2A relays controlled by 5V with a fuse triggered by a low state. modSSR-8CH-L
Module with one 240V/2A relay controlled by 5V with a fuse triggered by a high state. modSSR-1CH-H
Module with two 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-2CH-H
Module with four 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-4CH-H
No product available!
Module with eight 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-8CH-H
No product available!
A magnetic latching relay that features low power consumption and quiet operation. It allows switching of signals up to 36 V and 10 A. It remains in the last position it was in before power was lost. DFRobot DFR0996
No product available!
4-channel switch module with a maximum voltage of 16 V and a current of 2 A based on a MOSFET transistor. It is controlled by digital inputs. It is equipped with a screw connection and status LEDs. Adafruit 5757
Industrial module with 16 relays. It communicates via the RS485 interface and supports the Modbus RTU protocol. Waveshare Modbus RTU Relay 16CH
No product available!
Industrial module with 32 relays. It uses communication via the RS485 interface and supports the Modbus RTU protocol. Waveshare Modbus RTU Relay 32CH
No product available!
Industrial module with an Ethernet interface that allows you to control 8 relays via the RJ45 port. It uses Modbus TCP protocol, supports PoE (Power over Ethernet) and is equipped with a rail-mounted housing. Waveshare Modbus POE ETH Relay
No product available!
Numato Lab NLETHGC032-HT is a versatile 32-channel GPIO Ethernet module, ideal for advanced automation projects and expansion of electronic systems.
Ethernet GPIO module by Numato Lab equipped with 32 GPIO lines compatible with 3.3 V TTL levels and 11 analog inputs with 10-bit resolution, designed for remote control and monitoring of external devices over Ethernet using web interface, TELNET, and HTTP commands. Numato Lab NLETHGC032-HW
No product available!
Numato Lab RL20001EN is a 2-channel USB relay module with SPDT relays, 8 GPIO pins, 6 analog inputs and a USB interface, ideal for home automation, industrial, DIY and prototyping applications
No product available!
Numato Lab\'s 1-Channel USB Relay Module is an easy-to-use, flexible and versatile device, ideal for remote control of devices, home automation, prototyping and DIY projects, offering a 5V DPDT relay, GPIO, analog inputs and compatibility with multiple operating systems and serial console applications
No product available!
Module with relay HF152FD 16A. It allows you to control devices with a current consumption of up to 16A using a low-power signal. The module has a relay activation time of about 10ms. DFRobot DFR0251