8 Channel Bluetooth Relay Module - module with 8 12V relays and Bluetooth communication
ID: 1180968
zł490.77
Tax included
zł399.00 tax excl.
Module with 8 relays with a voltage of 12 V and a load of up to 7 A. The board communicates via the Bluetooth wireless interface. Numato Lab BTRL001
Description
Module with 8 relays with a voltage of 12 V and a load of up to 7 A and 2 GPIO pins, one of which can work in the analog input mode. The relays are controlled by a Microchip PIC microcontroller via Bluetooth and come with built-in firmware that supports simple commands to control the relays and read the status of the relays. The built-in USB connector allows you to update the firmware. All outputs are available on screw terminals, which makes it easy to connect external devices. The module will be used in home automation projects, lighting systems and garden equipment. Full documentation is available on the product page.
Features
- 8 built-in 12V SPDT relays
- Switching current 7 A
- 2 GPIO compatible with 3.3V TTL
- 1 channel of analog input (multiplexed with GPIO)
- 10-bit resolution of the analog input
- Built-in USB connector for software updates
- Class 2 Bluetooth version with a range of up to 10 meters
- Dimensions: 106.934 x 82.804 x 20 mm
1180968
Data sheet
- Output current
- 7 A
- Number of channels
- 8
- Executive element
- Przekaźnik
- Coil voltage
- 12 VDC
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with 64 relays with a maximum switching current of 10 A. It communicates via the USB interface. Numato Lab RL640001
zł2,654.43
Delivery date unknown
No product available!
8-channel IO expander with 6 analog inputs. Communicates via the Bluetooth wireless interface. Numato Lab BTIO001X
zł319.00
24h
Available quantity: 1
Available
Module with 8 relays with a voltage of 12 V and a load of up to 10 A. The board communicates via the Ethernet interface. Numato Lab 8ETHRL001
zł495.32
24h
Available quantity: 6
Available
Module with 8 relays with a voltage of 24 V and a load of up to 10 A. The board communicates via the Ethernet interface. Numato Lab 8ETHRL001-24
zł677.62
Delivery date unknown
No product available!
Other products in the same category (16)
Module with 8 relays 12 V with a maximum switching current of 7 A. Communicates via the USB interface. Numato Lab RL80001
zł441.59
3 weeks
No product available!
Module with 8 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8025ADAM
zł218.34
24h
Available quantity: 2
Available
Crowtail – Dry-Reed Relay 2.0 is a compact reed relay with hermetically sealed contacts, providing fast and reliable switching. Used in automation systems, microelectronics, and detection systems requiring precision and durability.
zł9.94
24h
Available quantity: 5
Available
Module with 5V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.
zł13.62
24h
Available quantity: 3
Available
Module with a 12 V relay and a timer. It allows you to turn the device on and off cyclically at a specified time using potentiometers. It can also operate in single trigger mode, which allows the device to be turned on after a signal has been applied for a specified period of time. The operating time can be adjusted from 1 s to 100 s or from 1 s to 15 min
zł14.55
24h
Available quantity: 8
Available
Module with 8 relays and 10 analog inputs. Communicates via the WiFi wireless interface. Numato Lab WFRL80001
zł1,080.86
3 weeks
No product available!
Module with 32 relays and 8 analog inputs. Communicates via the WiFi wireless interface. Numato Lab WFRL320001
zł1,720.13
3 weeks
No product available!
Switch module with a maximum voltage of 12 V and a current of 10 A based on a MOSFET transistor, controlled by a digital pin. It is equipped with a screw connection and a status LED. SparkFun SPX-19799
zł69.93
24h
Available quantity: 2
Available
4-channel SSR 240V / 2A relay module with fuse. modSSR-4CH
zł30.50
24h
Available quantity: 12
Available
2-channel SSR 240V / 2A relay module with fuse. modSSR-2CH
zł34.50
24h
Available quantity: 6
Available
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
zł42.50
24h
Available quantity: 1
Available
The module contains two 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select switching with high or low status. The module is equipped with screw connectors. modRL02_ISO
zł8.54
4 weeks
No product available!
This module allows independent control of two Omron G5LE-14-DC12 SPDT relays, supporting currents up to 10A. Thanks to built-in BSS138K MOSFETs, it can be controlled directly from 3.3V or 5V development boards such as Arduino or Raspberry Pi. Each channel is equipped with an LED to indicate relay activation and 5mm screw terminals for convenient circuit connection. Pololu 5666
zł65.36
6 weeks
No product available!
Module with MOSFET and a Gravity connector. It allows you to easily connect and control the voltage from 5V to 30V and the current up to 2.5A. DFRobot DFR0643
zł37.86
24h
Available quantity: 2
Available
A compact relay module with an Omron G5LE-14-DC5 relay, capable of controlling loads up to 10 A with a 5 V coil voltage. Thanks to a BSS138K MOSFET transistor, it can be activated by a 2.5 V to 20 V logic signal, facilitating interoperability with microcontrollers. The module is equipped with 5 mm screw terminals, a 3-pin JST SH connector, and LEDs to indicate operation. Pololu 5662
zł34.40
24h
Available quantity: 3
Available
Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012
zł52.19
4 weeks
No product available!
Module with 8 relays with a voltage of 12 V and a load of up to 7 A. The board communicates via the Bluetooth wireless interface. Numato Lab BTRL001