Numato Lab NLETHGC032-HT - 32-channel pluggable GPIO Ethernet, header on top module

A magnetic latching relay that features low power consumption and quiet operation. It allows switching of signals up to 36 V and 10 A. It remains in the last position it was in before power was lost. DFRobot DFR0996

The module with the HLS8-T73 relay with a load up to 5 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 103020005

This SPST solid-state relay module allows for safe switching of DC circuits up to 60 V and 7 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable isolation and long service life. Pololu 5420

Module with 2 relays SRD-05VDC-SL-C with a load up to 10 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020132

Industrial module based on the ESP32-S3 microcontroller, which supports WiFi, Bluetooth and RS485 interface. Equipped with 6 high-power relays (up to 10A at 250VAC/30VDC), it allows for safe control of various devices and integration with industrial sensors via the Modbus protocol. The module supports popular programming environments such as Arduino and MicroPython, making it ideal for AIoT and remote monitoring applications. Waveshare ESP32-S3-Relay-6CH

The module contains four 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select switching with high or low status. The module is equipped with screw connectors. modRL04_ISO

The module with two 12 V relays and optoisolation enables safe control of AC and DC loads from a microcontroller. Support for high-level or low-level triggering and LED indication make it a universal component in automation systems, control applications, and DIY projects. modRL02_ISO-12V

The module is designed for easy and reliable switching between two different power sources. It ensures safe use of two power sources (with voltage from 1.6 to 5.5 V) without the risk of damaging components. Adafruit 5830

The module with SSR BT136S relay with a load of up to 2 A, designed for M5Stack sets. The board is equipped with a Grove connector and is controlled by a digital input. M5Stack U122

Module with 32 24 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 32ETHRL001-24

4-channel module with relays, designed to work with the Raspberry Pi. It can switch 120VAC/2A or 24VDC/2A signals. SB Components 14071

The module contains two 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select switching with high or low status. The module is equipped with screw connectors. modRL02_ISO

Module with 16 relays with a maximum switching current of 7 A. It communicates via the USB interface. Numato Lab RL160001

Module with 16 relays 12 V with a maximum switching current of 7 A. Numato Lab RL40003

Module with 16 relays and 8 analog inputs. Communicates via the WiFi wireless interface. Numato Lab WFRL160001

Module with 32 relays and 8 GPIO pins and 8 analog inputs. It communicates via the RS485, USB or Ethernet interface and supports the Modbus RTU/TCP protocol. Numato Lab NLRM1002-A