modRL04_ISO - power module with four 5V relays and optoisolation of inputs
ID: 559506
5906623454891
zł22.40
Tax included
zł18.21 tax excl.
The module contains four 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select switching with high or low status. The module is equipped with screw connectors. modRL04_ISO
Description
The module allows independent control of four loads connected to the output, and the optical separation of inputs from relays protects the device controlling the module against damage. modRL04_ISO operates at 5V and can control the load with a maximum current consumption of 10A (at 250V AC) in NO / NC mode. Both input and output signals are connected to the screw connectors, which guarantees an effective and reliable connection. The module also has the ability to change the state at which the relay should be activated - it can be triggered by a low or high state.
properties
- Module with four relays
- Input optoisolation
- Operating voltage: 5 V DC
- Power consumption: approx. 80 mA / channel
- It has LEDs for channel operation and module power supply
- The possibility of independent configuration of the triggering state
- Screw connectors for input and output signals
- NO and NC contacts are output
- It has mounting holes with a diameter of 3 mm
- Dimensions: 73 x 50 x 20 mm
559506
Data sheet
- Output current
- 10A
- Number of channels
- 4
- Executive element
- Przekaźnik
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
The module contains two 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select switching with high or low status. The module is equipped with screw connectors. modRL02_ISO
zł8.54
Delivery date unknown
No product available!
The module contains eight 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select high or low switching. The module is equipped with screw connectors. modRL08_ISO
zł21.01
24h
Available quantity: 20
Available
The module is equipped with four 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. ICSTATION ICSE012A
zł44.58
24h
Available quantity: 2
Available
The module contains a 5 V relay with a maximum current of 10 A (250 VAC) and optoisolated inputs, and with jumpers it is possible to select high or low switching. The module is equipped with screw connectors
zł8.84
24h
Available quantity: 214
Available
Other products in the same category (16)
Module with 4 SSR relays with a load of up to 3 A. The board communicates via the USB interface. Numato Lab SSR40001-DC
zł527.26
24h
Available quantity: 2
Available
Available
Extension module compatible with Raspberry Pi. The board is equipped with three 24 V 2 A relays, three buffer inputs, three sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM213
zł183.33
24h
Available quantity: 3
Available
Available
Module with 2 relays controlled by the I2C interface. Each relay can switch currents up to 25 A at 12 to 280 V AC. SparkFun COM-16810
zł901.07
3 weeks
No product available!
8-channel PoE module with relays allowing you to connect your PC to other electronic circuits via the network. It does not need a separate cable for power and data transmission. It can be controlled via a simple web interface or Telnet. Numato Lab NLRP1001-A
zł1,359.00
3 weeks
No product available!
Switch module with a maximum voltage of 40 V and a current of 10 A, based on a MOSFET transistor, HT0740 driver and I2C expander. It has a screw connection and a status LED. Pimoroni PIM455
zł79.06
24h
Available quantity: 4
Available
Module with 64 relays and 8 GPIO pins and 6 analog inputs. It communicates via the RS485, USB or Ethernet interface and supports the Modbus RTU/TCP protocol. Numato Lab NLRM1003-A
zł3,308.32
3 weeks
No product available!
A magnetic latching relay that features low power consumption and quiet operation. It allows switching of signals up to 36 V and 10 A. It remains in the last position it was in before power was lost. DFRobot DFR0996
zł33.25
24h
Available quantity: 4
Available
Module with two 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-2CH-H
zł13.15
4 weeks
No product available!
Module with 5 A 250 VAC relay. DFRobot DFR0017
zł12.71
24h
Available quantity: 3
Available
Module with electromechanical relay. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 3 A or a voltage of 30 V DC and a current of 3 A
zł9.27
24h
Available quantity: 14
Available
Module with SSR 240V/2A relay controlled by 5V voltage with fuse. modSSR-1CH
zł8.43
24h
Available quantity: 30
Available
8 Channel Ethernet Solid State Relay Module - module with 8 SSR DC relays and Ethernet communication
Module with 8 SSR relays with a load of up to 3 A. The board communicates via the Ethernet interface. Numato Lab 8ETHSSR001-DC
zł1,031.69
3 weeks
No product available!
Module with 2 relays with a maximum switching current of 7 A. It communicates via the USB interface. Numato Lab RL20001
zł171.11
24h
Available quantity: 1
Available
Available
The module contains four 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select switching with high or low status. The module is equipped with screw connectors. modRL04_ISO