Basic 2-Channel SPDT Relay Carrier - board with connector for 2 SPDT relays
ID: 1201583
5902186330894
zł28.68
Tax included
zł23.32 tax excl.
A versatile board for two SPDT "sugar cube" relays, allowing for easy control using 2.5-20V logic signals. Built-in BSS138K MOSFETs and LEDs indicating channel activation make the module ideal for use with Arduino and Raspberry Pi. The board supports 5V or 12V relays, and JST SH connectors and 5mm terminal holes ensure convenient connection. Pololu 5667
Description
Basic 2-Channel SPDT Relay Carrier is a compact board designed for easy integration of two SPDT (“sugar cube”) relays into electronic projects. The module features built-in MOSFET transistors that allow the relays to be controlled using low-current digital signals, making it an ideal choice for Arduino and Raspberry Pi applications. Additionally, the board includes LED indicators that show the activation status of each channel, simplifying diagnostics and system monitoring.
The board provides access to four control pins via a 4-pin JST SH connector, compatible with Pololu, SparkFun Qwiic, and Adafruit STEMMA QT cables (note: the interface is not I²C-compatible). Relay contact connections (NO, NC, COM) are available through holes for 5 mm screw terminals or standard 0.2″ pin spacing, allowing flexible integration with various actuator circuits. Thanks to the Zener protection diode and precisely designed PCB layout, the module ensures fast relay coil current decay and safe galvanic isolation.
The board can be powered with 5 V or 12 V, depending on the installed relays, while the control signals support logic levels from 2.5 V to 20 V. The module’s design includes four mounting holes compatible with M3 or #4 screws, allowing easy installation in enclosures or panels. There is also the option to install a DC barrel jack connector, which can be positioned in several configurations.
Features
- Number of channels: 2
- Relay coil voltage: 5 V / 12 V (depending on the installed relay)
- Relay type: SPDT (“sugar cube”, not included)
- Control: digital, logic level 2.5–20 V
- Control transistors: BSS138K N-MOSFET
- Control connector: 4-pin JST SH (VDD, GND, EN1, EN2)
- Output connectors: holes for 5 mm screw terminals
- Zener diode: fast coil current discharge
- LED indicators: show relay activation status
- Optional power input: via DC barrel jack (not included)
- Mounting holes: 4 × M3 / #4
- Dimensions: 46 × 38 × 6 mm
- Weight: 5.8 g
1201583
Data sheet
- Output current
- 900 mA
- Number of channels
- 2
- Executive element
- Stand
- Coil voltage
- Nie dotyczy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
This module allows independent control of two Omron G5LE-14-DC12 SPDT relays, supporting currents up to 10A. Thanks to built-in BSS138K MOSFETs, it can be controlled directly from 3.3V or 5V development boards such as Arduino or Raspberry Pi. Each channel is equipped with an LED to indicate relay activation and 5mm screw terminals for convenient circuit connection. Pololu 5666
zł64.30
24h
Available quantity: 2
Available
This module allows independent control of two Omron G5LE-14-DC5 SPDT relays, supporting currents up to 10A. Thanks to built-in BSS138K MOSFETs, it can be controlled directly from 3.3V or 5V development boards such as Arduino or Raspberry Pi. Each channel is equipped with an LED to indicate relay activation and 5mm screw terminals for convenient circuit connection. Pololu 5665
zł64.30
24h
Available quantity: 2
Available
Other products in the same category (16)
The module is designed for easy and reliable switching between two different power sources. It ensures safe use of two power sources (with voltage from 1.6 to 5.5 V) without the risk of damaging components. Adafruit 5830
zł12.94
24h
Available quantity: 7
Available
Module with 16 relays with a maximum switching current of 7 A. It communicates via a USB interface. Numato Lab RL160001-24
zł644.79
24h
Available quantity: 2
Available
Industrial module with 8 relays and 8 digital inputs. It communicates via the RS485 interface and supports communication using the Modbus RTU protocol. Waveshare Modbus RTU Relay (D)
zł137.75
4 weeks
No product available!
Industrial module based on the ESP32-S3 microcontroller, which supports WiFi, Bluetooth and RS485 interface. Equipped with 6 high-power relays (up to 10A at 250VAC/30VDC), it allows for safe control of various devices and integration with industrial sensors via the Modbus protocol. The module supports popular programming environments such as Arduino and MicroPython, making it ideal for AIoT and remote monitoring applications. Waveshare ESP32-S3-Relay-6CH
zł114.44
4 weeks
No product available!
A versatile module that allows you to control higher voltage devices such as 12V LED strips while simultaneously powering a microcontroller from 3.3V. The module integrates an LMR14203 converter and an N-channel MOSFET (PSMN7R0-100BS), allowing you to power the board at up to 12V and drive loads up to 10A, with additional protection features and LED indicators, making it ideal for projects requiring efficient power control. SparkFun COM-23979
zł76.53
3 weeks
No product available!
Industrial Ethernet module that allows control of 30 relays via RJ45 port. It uses Modbus TCP protocol, PoE (Power over Ethernet) power supply and comes with a rail-mounted housing. Waveshare Modbus POE ETH Relay 30CH
zł293.36
4 weeks
No product available!
Industrial module with Ethernet interface that allows control of 8 relays via RJ45 port and has 8 built-in digital inputs. It uses Modbus TCP protocol, PoE (Power over Ethernet) power supply and is equipped with a rail-mounted housing. Waveshare Modbus POE ETH Relay (B)
zł178.25
4 weeks
No product available!
The 5V relay module with opto-isolation allows you to safely control loads up to 10A at voltages up to 250V AC or 30V DC, working with microcontroller platforms such as Arduino or Raspberry Pi
zł6.90
4 weeks
No product available!
Industrial relay module controlled via RS485 interface with Modbus RTU protocol support, offering 8 outputs with maximum load of 10 A. Equipped with galvanic isolation, opto-isolation, TVS diodes and DIN mounting, it ensures safe and reliable operation in harsh industrial conditions. Thanks to functions such as flash-on/off, configurable RS485 address (1-255), signaling diodes and wide power supply range (7-36 V), the module is perfect for building automation and device control. Waveshare Modbus RTU Relay (B)
zł139.67
4 weeks
No product available!
HF32FA-G relay module for controlling devices with current consumption and voltage up to 10A/250VAC. Its compact design and high electrical performance make it ideal for use in home automation systems, DIY projects and IoT devices. Seeed Studio 114993555
zł21.89
24h
Available quantity: 94
Available
The 24 V relay module with adjustable delay time offers a practical solution for AC/DC load control in automation and electronics applications
zł42.77
24h
Available quantity: 11
Available
1-channel relay module with optoisolation and configurable triggering is a versatile solution for load control in microcontroller projects. Thanks to its compact design and stable connectors, it is suitable for automation and prototyping applications.
zł9.90
24h
Available quantity: 162
Available
This SPST solid-state relay module allows for safe switching of DC circuits up to 30 V and 11 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable insulation and long service life. Pololu 5421
zł16.59
4 weeks
No product available!
This SPST solid-state relay module allows for safe switching of DC circuits up to 60 V and 7 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable isolation and long service life. Pololu 5420
zł13.30
24h
Available quantity: 20
Available
This industrial relay module, powered by the Raspberry Pi RP2350B microcontroller, features six 10A 250VAC/30VDC relays and an isolated RS485 interface. It ensures safe and stable operation thanks to opto-isolation, power isolation, and surge protection. It supports programming in C/C++, MicroPython, and the Arduino IDE, and the 40-pin Pico HAT connector allows for easy expansion. Its robust DIN housing and 7–36V DC power supply make it ideal for industrial automation and IoT projects. Waveshare 31790
zł110.85
24h
Available quantity: 4
Available
The module with two 12 V relays and optoisolation enables safe control of AC and DC loads from a microcontroller. Support for high-level or low-level triggering and LED indication make it a universal component in automation systems, control applications, and DIY projects. modRL02_ISO-12V
zł9.90
4 weeks
No product available!
A versatile board for two SPDT "sugar cube" relays, allowing for easy control using 2.5-20V logic signals. Built-in BSS138K MOSFETs and LEDs indicating channel activation make the module ideal for use with Arduino and Raspberry Pi. The board supports 5V or 12V relays, and JST SH connectors and 5mm terminal holes ensure convenient connection. Pololu 5667