24V relay module with timer
ID: 579757
5906623458011
zł13.60
Tax included
zł11.06 tax excl.
Module with 24V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.
Description
Module with 24 V relay and timer. It allows the implementation of delayed switching on or off of the circuit. It has an adjustable relay switching time in two ranges: from 1 s to 100 s and from 1 s to 15 min. The relay has two output circuits: NC - normally closed and NO - normally open.
Features
- Potentiometer T1 for adjusting the opening delay time
- Potentiometer T2 for adjusting the closing delay time
- Switch on / off delay range: 1 s to 100 s (range 1) and 1 s to 15 min (range 2)
- Mode selection jumper: single or cyclic
- Time range setting jumper
- LED diodes:
- red - power supply indication
- blue - signaling relay activation
- Relay contact load: 10A / 250V AC, 10A / 30V DC
- 100,000 cycles relay life
- Two output circuits: NO and NC
- Mounting holes
- 24 V power supply
- Current consumption up to 40 mA
- Dimensions: 70 x 20 x 22 mm
Kit contains
- JK11 module with 24V relay
- 2 x Cable with connector
579757
Data sheet
- Output current
- 10A
- Number of channels
- 1
- Executive element
- Przekaźnik
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with 5V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.
zł13.62
24h
Available quantity: 1
Available
Module with a 12 V relay and a timer. It allows you to turn the device on and off cyclically at a specified time using potentiometers. It can also operate in single trigger mode, which allows the device to be turned on after a signal has been applied for a specified period of time. The operating time can be adjusted from 1 s to 100 s or from 1 s to 15 min
zł14.55
Delivery date unknown
No product available!
Other products in the same category (16)
Module with 4 digital inputs, 4 outputs and 6 analog (current) inputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP9038ADAM
zł232.45
4 weeks
No product available!
Module with 8 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8025ADAM
zł218.34
4 weeks
No product available!
Module with 8 digital inputs and 4 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8024ADAM
zł222.81
24h
Available quantity: 3
Available
AO3406 MOSFET transistor module with N channel and JST PH2.0 connector designed to control motor, solenoid or LEDs. Adafruit 5648
zł20.93
24h
Available quantity: 4
Available
Module with eight 240V/2A relays controlled by 5V with a fuse triggered by a low state. modSSR-8CH-L
zł50.04
24h
Available quantity: 1
Available
Module with one 240V/2A relay controlled by 5V with a fuse triggered by a high state. modSSR-1CH-H
zł6.73
24h
Available quantity: 4
Available
Module with two 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-2CH-H
zł13.15
4 weeks
No product available!
Module with four 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-4CH-H
zł23.03
4 weeks
No product available!
Module with eight 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-8CH-H
zł53.65
4 weeks
No product available!
A magnetic latching relay that features low power consumption and quiet operation. It allows switching of signals up to 36 V and 10 A. It remains in the last position it was in before power was lost. DFRobot DFR0996
zł33.25
24h
Available quantity: 2
Available
4-channel switch module with a maximum voltage of 16 V and a current of 2 A based on a MOSFET transistor. It is controlled by digital inputs. It is equipped with a screw connection and status LEDs. Adafruit 5757
zł62.87
24h
Available quantity: 2
Available
Industrial module with 16 relays. It communicates via the RS485 interface and supports the Modbus RTU protocol. Waveshare Modbus RTU Relay 16CH
zł178.94
24h
Available quantity: 36
Available
Switch module with a maximum voltage of 12 V and a current of 10 A based on a MOSFET transistor, controlled by a digital pin. It is equipped with a screw connection and a status LED. SparkFun SPX-19799
zł69.93
24h
Available quantity: 2
Available
Industrial module with 32 relays. It uses communication via the RS485 interface and supports the Modbus RTU protocol. Waveshare Modbus RTU Relay 32CH
zł277.77
4 weeks
No product available!
Industrial module with an Ethernet interface that allows you to control 8 relays via the RJ45 port. It uses Modbus TCP protocol, supports PoE (Power over Ethernet) and is equipped with a rail-mounted housing. Waveshare Modbus POE ETH Relay
zł163.41
24h
Available quantity: 16
Available
Numato Lab NLETHGC032-HT is a versatile 32-channel GPIO Ethernet module, ideal for advanced automation projects and expansion of electronic systems.
zł474.72
24h
Available quantity: 2
Available
Module with 24V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.