 
        
           
        
          Module with MOSFET transistor and Gravity connector. It allows you to easily connect and control the voltage from 5 V to 30 V and the current up to 2.5 A. The module has a built-in toggle switch for easy switching of NC/NO mode and an LED indicator that shows the status of the output. The power supply and the actuator are connected via the DC2.1 connector. The kit includes useful adapters and plugs. It will find use in applications such as robot control, lighting and smart home.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Module with SSR 240V/2A relay controlled by 5V voltage with fuse. modSSR-1CH
Module with 5V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.
Module with a 12 V relay and a timer. It allows you to turn the device on and off cyclically at a specified time using potentiometers. It can also operate in single trigger mode, which allows the device to be turned on after a signal has been applied for a specified period of time. The operating time can be adjusted from 1 s to 100 s or from 1 s to 15 min
Module with 24V relay and timer. It allows the implementation of delayed switching on or off of the circuit with adjustable time in the range from 1 s to 100 s and from 1 s to 15 min.
 No product available!
Industrial Ethernet module that allows control of 30 relays via RJ45 port. It uses Modbus TCP protocol, PoE (Power over Ethernet) power supply and comes with a rail-mounted housing. Waveshare Modbus POE ETH Relay 30CH
 No product available!
Numato Lab RL20001EN is a 2-channel USB relay module with SPDT relays, 8 GPIO pins, 6 analog inputs and a USB interface, ideal for home automation, industrial, DIY and prototyping applications
 No product available!
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
 No product available!
The 5 V relay module enables safe switching of high-voltage loads via microcontroller logic. Its compact size, mechanical durability, and wide operating conditions make it a versatile choice for automation, lighting control, and DIY electronics projects.
 No product available!
Module with 16 relays with a maximum switching current of 7 A. It communicates via a USB interface. Numato Lab RL160001-24
The module with SSR BT136S relay with a load of up to 2 A, designed for M5Stack sets. The board is equipped with a Grove connector and is controlled by a digital input. M5Stack U122
The Pololu 5422 module enables precise and safe control of loads in RC systems while maintaining galvanic isolation. The solid-state relay with SPST configuration provides silent switching of currents up to 6 A and voltages up to 60 V. It is dedicated to switching motors, valves, and other components in RC and automation projects.
 No product available!
2-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 14088
Module with 32 relays and 8 GPIO pins and 8 analog inputs. It communicates via the RS485, USB or Ethernet interface and supports the Modbus RTU/TCP protocol. Numato Lab NLRM1002-A
 No product available!
The module contains two 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select switching with high or low status. The module is equipped with screw connectors. modRL02_ISO
 No product available!
Module with 4 relays with a maximum switching current of 7 A. Equipped with the ATmega328P microcontroller, it can be programmed in the Arduino IDE. Numato Lab PRLY002
4-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 06670
Module with a 12 V relay and a timer. It enables the implementation of delayed switching on or off of the circuit with the possibility of time adjustment
 No product available!
Module with 16 relays and 8 GPIO pins and 8 analog inputs. It communicates via the RS485, USB or Ethernet interface and supports the Modbus RTU/TCP protocol. Numato Lab NLRM1001-A
 No product available!
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284
8-channel PoE module with relays allowing you to connect your PC to other electronic circuits via the network. It does not need a separate cable for power and data transmission. It can be controlled via a simple web interface or Telnet. Numato Lab NLRP1001-A
 No product available!
 
                    Module with MOSFET and a Gravity connector. It allows you to easily connect and control the voltage from 5V to 30V and the current up to 2.5A. DFRobot DFR0643