4 Channel USB Powered Relay Module - module with 4 relays and USB interface + enclosure

Numato Lab NLETHGC032-HT is a versatile 32-channel GPIO Ethernet module, ideal for advanced automation projects and expansion of electronic systems.

16-channel PoE module with relays allowing you to connect your PC to other electronic circuits via the network. It does not need a separate cable for power and data transmission. It can be controlled via a simple web interface or Telnet. Numato Lab NLRP1002-A

This module allows independent control of two Omron G5LE-14-DC5 SPDT relays, supporting currents up to 10A. Thanks to built-in BSS138K MOSFETs, it can be controlled directly from 3.3V or 5V development boards such as Arduino or Raspberry Pi. Each channel is equipped with an LED to indicate relay activation and 5mm screw terminals for convenient circuit connection. Pololu 5665

Module with SSR 240V/2A relay controlled by 5V voltage with fuse. modSSR-1CH

Module with 16 12 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 16ETHRL001

Programmable time module with relay, allows you to set the time and manner of relay reaction on the trigger signal, has a built-in LED display. It can be supplied with voltage from the range of 6 - 30VDC or using the microUSB connector

Module with 8 relays with a voltage of 12 V and a load of up to 7 A. The board communicates via the Bluetooth wireless interface. Numato Lab BTRL001

Gravity: Digital 10A Relay Module is a module with 10A 35VAC / 30VDC relay compatible with devices with control signals in the range of 2.8 ... 5.5V. DFRobot DFR0473

Module with 4 digital inputs, 4 outputs and 6 analog (current) inputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP9038ADAM

This module allows you to control two SPDT relays and eight digital inputs up to 24V. Powered via USB Type-C, it operates as a CDC device, allowing for simple operation without additional software. The module is ideal for home automation, IoT projects, test systems, and lighting control. Indicator LEDs and a rugged design ensure intuitive control and reliable operation in a variety of applications. Numato Lab NLUSBRC002

The module is equipped with four 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. ICSTATION ICSE012A

Industrial module with an Ethernet interface that allows you to control 8 relays via the RJ45 port. It uses Modbus TCP protocol, supports PoE (Power over Ethernet) and is equipped with a rail-mounted housing. Waveshare Modbus POE ETH Relay

2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21284

Industrial module with Ethernet interface that allows control of 8 relays via RJ45 port and has 8 built-in digital inputs. It uses Modbus TCP protocol, PoE (Power over Ethernet) power supply and is equipped with a rail-mounted housing. Waveshare Modbus POE ETH Relay (B)

Switch module with a maximum voltage of 40 V and a current of 10 A, based on a MOSFET transistor, HT0740 driver and I2C expander. It has a screw connection and a status LED. Pimoroni PIM455

8-channel PoE module with relays allowing you to connect your PC to other electronic circuits via the network. It does not need a separate cable for power and data transmission. It can be controlled via a simple web interface or Telnet. Numato Lab NLRP1001-A