Non-Latching Mini Relay FeatherWing - a module with a relay for Feather tiles
ID: 561598
5906623429202
zł52.00
Tax included
zł42.28 tax excl.
Module with monostable relay. It allows you to control high-power elements with a microcontroller. Adafruit 2895
Description
Module with monostable relay dedicated to boards from the Feather series. It allows you to control high-power elements with a microcontroller. It enables switching currents up to 2 A (at 40 VAC or 30 VDC) and voltage up to 250 VAC. The relay is controlled by one SET pin. Normally the COM contact is connected to the NC contact. When a high state is given to the SET pin, the COM contact will be connected with the NO contact. There is a LED diode on the board, which signals the state of switching on the relay. Full documentation with examples is available on the product page.
Features
- Module with monostable relay
- Maximum current consumption of controlled elements:
- Up to 2 A for 30 V DC 40 V AC
- Up to 0.6 A for 110 V DC
- Up to 0.5 A for 120 V AC
- Up to 0.3 A for 250 V AC
- Reset button
- Dimensions: 50.8 x 22.9 x 11.4 mm
- Weight: 5.6 g
Kit contains
- Non-Latching Mini Relay FeatherWing module
- 2 x goldpin straight male 16-pin
- 3-pin ARK screw connection
561598
Data sheet
- Output current
- 2A
- Number of channels
- 1
- Executive element
- Przekaźnik
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much). Adafruit 2796
zł137.85
24h
Available quantity: 1
Available
Low-power, 2.4GHz spectrum wireless protocol that you can use with iOS without needing special certification. Supported by all modern smart phones - excellent for use in portable projects that will make use of an iOS or Android phone or tablet; it also is supported in Mac OS X and Windows 8+. Adafruit 2995
zł155.48
Delivery date unknown
No product available!
Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3010
zł261.29
24h
Available quantity: 1
Available
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3061
zł206.07
Delivery date unknown
No product available!
Other products in the same category (16)
Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012
zł47.61
24h
Available quantity: 2
Available
The module with 4 relays is designed to work with Arduino. It allows you to control devices with operating parameters up to 250VAC/7A or 30VDC/10A. Seeed Studio 103030009
zł108.41
24h
Available quantity: 1
Available
The module with 2 relays is designed for the M5Stack sets. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 8 A or a voltage of 28 V DC and a current of 8 A. M5Stack U131
zł39.90
24h
Available quantity: 1
Available
The module with the relay is designed for the M5Stack sets. It allows you to control devices with a working voltage of up to 220 V AC and a current of up to 3 A or a voltage of 30 V DC and an intensity of 3 A. M5Stack U023
zł19.96
24h
Available quantity: 3
Available
Module with 5 V relay with a maximum switching current of 2 A. It communicates via the USB interface and does not require an additional power supply. Numato Lab USBPOWRL002
zł131.67
24h
Available quantity: 1
Available
Module with SSR relay with a load of up to 3 A. It communicates via the USB interface and does not require additional power supply. Numato Lab SSRP20001-DC
zł225.80
24h
Available quantity: 1
Available
Module with SSR relay with a load of up to 3 A. It communicates via the USB interface and does not require additional power supply. Numato Lab SSRP20001-AC
zł294.93
24h
Available quantity: 1
Available
Module with 16 12 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 16ETHRL001
zł655.61
3 weeks
No product available!
Module with 16 24 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 16ETHRL001-24
zł748.97
3 weeks
No product available!
Module with 16 relays 12 V with a maximum switching current of 7 A. Numato Lab RL40003
zł148.03
24h
Available quantity: 1
Available
Module with 16 relays with a maximum switching current of 7 A. It communicates via the USB interface. Numato Lab RL160001
zł488.95
3 weeks
No product available!
Module with 16 relays and 8 analog inputs. Communicates via the WiFi wireless interface. Numato Lab WFRL160001
zł1,365.79
3 weeks
No product available!
Module with 2 relays 12 V with a load of up to 7 A. The board communicates via the Bluetooth wireless interface. Numato Lab BTRL002
zł356.15
24h
Available quantity: 1
Available
Module with 2 relays with a maximum switching current of 7 A. Equipped with the ATmega328P microcontroller, it can be programmed in the Arduino IDE. Numato Lab PRLY001
zł325.54
24h
Available quantity: 1
Available
Module with 2 relays 12 V with a maximum switching current of 7 A. Numato Lab RL20002
zł90.84
24h
Available quantity: 2
Available
Module with 2 SSR relays with a load of up to 3 A. The board is equipped with the ULN2003 system and communicates via a digital interface. Numato Lab SSRC20001-DC
zł323.98
24h
Available quantity: 1
Available
Module with monostable relay. It allows you to control high-power elements with a microcontroller. Adafruit 2895