8 Channel PoE Relay Module - a module with 8 relays and Ethernet communication

The Pololu 5423 module provides reliable load control in RC systems with full galvanic isolation. The SPST solid-state relay supports up to 6 A at voltages up to 60 V and is suitable for applications requiring silent operation, durability, and precise control using RC signals. The version without soldered connectors offers flexibility for adaptation to individual projects.

A compact Omron G5LE-14-DC12 relay module that allows you to control loads up to 10 A with a coil voltage of 12 V. Thanks to the BSS138K MOSFET transistor, it can be activated by a 2.5 V to 20 V logic signal, facilitating interoperability with microcontrollers. The module is equipped with 5 mm screw terminals, a 3-pin JST SH connector, and LEDs to indicate operation. Pololu 5663

The module with two 12 V relays and optoisolation enables safe control of AC and DC loads from a microcontroller. Support for high-level or low-level triggering and LED indication make it a universal component in automation systems, control applications, and DIY projects. modRL02_ISO-12V

Module with 8 relays with a voltage of 24 V and a load of up to 10 A. The board communicates via the Ethernet interface. Numato Lab 8ETHRL001-24

1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277

This SPST solid-state relay module allows for safe switching of DC circuits up to 60 V and 7 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable isolation and long service life. Pololu 5420

The module with 4 relays is designed to work with Arduino. It allows you to control devices with operating parameters up to 250VAC/7A or 30VDC/10A. Seeed Studio 103030009

Relay module for the WeMos D1 Mini WiFi set

The module is equipped with eight 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. The board recommended for use with Arduino enables the control of eight relays using only two microcontroller lines. ICSTATION ICSE014A

Module with 8 SSR relays with a load of up to 3 A. The board is equipped with the ULN2003 system and communicates via a digital interface. Numato Lab SSRC80001-AC

Module with 16 relays and 8 GPIO pins and 8 analog inputs. It communicates via the RS485, USB or Ethernet interface and supports the Modbus RTU/TCP protocol. Numato Lab NLRM1001-A

Module with 4 SSR relays with a load of up to 3 A. The board communicates via the USB interface. Numato Lab SSR40001-DC

The module is ideal for applications requiring precise control and signal processing, with the ability to be easily controlled via Ethernet. Numato Lab NLETHGC016-HB

Numato Lab NLETHGC032-HT is a versatile 32-channel GPIO Ethernet module, ideal for advanced automation projects and expansion of electronic systems.

8-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. With LCD 4,3" display. SB Components 21871

The module contains eight 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select high or low switching. The module is equipped with screw connectors. modRL08_ISO