zł30.52
Grove Relay - module with 5A/250VAC relay
ID: 564201
5906623414130
zł13.80
Tax included
zł11.22 tax excl.
The module with the HLS8-T73 relay with a load up to 5 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 103020005
Description
Module with electromechanical relay HLS8-T73 with a load of up to 5 A, which guarantees 100 thousand. switching cycles. There is also a LED diode on the board, which signals the state of switching on the relay. The module allows you to switch devices with high power using, for example, a microcontroller. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module is controlled by a digital input and is supplied with the voltage from 3.3 V to 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Operating voltage: 3.3 to 5V
- Rated input voltage 5V
- Load voltage: 250 VAC, 30 VDC
- Load current up to 5 A.
- Switching cycles: 100,000
- Interface: digital input
- Output interface: 2-pin terminal
- Supply voltage: 3.3 V or 5 V
- Current consumption: 100 mA
- Dimensions: 40 x 20 mm
Kit contains
- Grove Relay module
- Grove cable
564201
Data sheet
- Output current
- 5A
- Number of channels
- 1
- Executive element
- Przekaźnik
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 108
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł191.76
24h
Available quantity: 225
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 23
Available
Module with relay SSR G3MC202P with a load up to 2 A. The board is equipped with a Grove connector and is controlled via digital input. Seeed Studio 103020137
zł87.59
Delivery date unknown
No product available!
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 3
Available
Other products in the same category (16)
Industrial module with 8 relays. It communicates via RS485 interface and supports Modbus RTU protocol. Waveshare Modbus RTU Relay (EN)
zł123.50
4 weeks
No product available!
Module with 4 digital inputs, 4 outputs and 6 analog (current) inputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP9038ADAM
zł232.45
4 weeks
No product available!
Module with 8 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8025ADAM
zł218.34
4 weeks
No product available!
Module with 8 digital inputs and 4 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8024ADAM
zł222.81
24h
Available quantity: 3
Available
AO3406 MOSFET transistor module with N channel and JST PH2.0 connector designed to control motor, solenoid or LEDs. Adafruit 5648
zł20.74
4 weeks
No product available!
Module with eight 240V/2A relays controlled by 5V with a fuse triggered by a low state. modSSR-8CH-L
zł50.04
24h
Available quantity: 1
Available
Module with one 240V/2A relay controlled by 5V with a fuse triggered by a high state. modSSR-1CH-H
zł6.73
4 weeks
No product available!
Module with two 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-2CH-H
zł13.15
4 weeks
No product available!
Module with four 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-4CH-H
zł23.03
4 weeks
No product available!
Module with eight 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-8CH-H
zł53.65
4 weeks
No product available!
A magnetic latching relay that features low power consumption and quiet operation. It allows switching of signals up to 36 V and 10 A. It remains in the last position it was in before power was lost. DFRobot DFR0996
zł33.25
4 weeks
No product available!
4-channel switch module with a maximum voltage of 16 V and a current of 2 A based on a MOSFET transistor. It is controlled by digital inputs. It is equipped with a screw connection and status LEDs. Adafruit 5757
zł62.77
24h
Available quantity: 1
Available
Industrial module with 16 relays. It communicates via the RS485 interface and supports the Modbus RTU protocol. Waveshare Modbus RTU Relay 16CH
zł178.94
24h
Available quantity: 19
Available
Switch module with a maximum voltage of 12 V and a current of 10 A based on a MOSFET transistor, controlled by a digital pin. It is equipped with a screw connection and a status LED. SparkFun SPX-19799
zł69.93
24h
Available quantity: 1
Available
Industrial module with 32 relays. It uses communication via the RS485 interface and supports the Modbus RTU protocol. Waveshare Modbus RTU Relay 32CH
zł277.77
4 weeks
No product available!
Industrial module with an Ethernet interface that allows you to control 8 relays via the RJ45 port. It uses Modbus TCP protocol, supports PoE (Power over Ethernet) and is equipped with a rail-mounted housing. Waveshare Modbus POE ETH Relay
zł163.41
24h
Available quantity: 12
Available
The module with the HLS8-T73 relay with a load up to 5 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 103020005