DC motor driver with a working voltage from 5 to 30 V and a maximum continuous current of 13 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MD10C

Digital IR distance sensor operating on the basis of a modulated signal with a frequency of 38 kHz. It can detect objects at a distance of up to 60 cm and is powered with a voltage from 4.5 to 5.5 V. Cytron MAKER-OBJECT

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 5.5x1.7 mm DC plug

3-axis accelerometer with digital SPI / I2C output, measures acceleration in the range of ± 6g / ± 12g / ± 24g, QFN24, STMicroelectronics

Expansion board for STM32 Nucleo based on S2-LP RF transmitter operating in 868MHz band. The expansion board is compatible with ST morpho and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-S2868A2

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0300-O

An IPS LCD display with a 3.5" touchscreen panel. It is equipped with an HDMI interface for video display and USB Type C ports for touchscreen operation. It offers a resolution of 480x800 pixels. Waveshare 3.5inch 480x800 LCD

The LIS3DH 12-bit 3-axis capacitive accelerometer module is a great tool for motion detection in your projects, capturing accelerations in three axes (3DoF). Simple configuration with SPI or I2C interface, as well as the ability to work on a breadboard, make the module user-friendly and perfect for various applications, from robotics to wearable devices. SparkFun SEN-20659

The 2-meter HDMI to HDMI cable enables the transmission of audio and video signals in 4K resolution at 60 Hz, in accordance with the HDMI 2.0 standard. With gold-plated connectors, it ensures high-quality transmission, and its versatility allows it to connect devices such as televisions, Blu-ray players, and game consoles.

DC-DC Step-Down Converter Module AP63357 with 5V output voltage, 3.8 to 32V input voltage and 3.5A maximum output current. It has a very small board format, so it can be used in any project. SparkFun COM-21256

5 mm green LED. Set of 10 pieces

KAmodQTR8A is a module with eight photointerrupter sensors KTIR0711S. It allows to detect edge or line. Thanks to the analog outputs, is possible to connect a module to the e.g. comparator. The module can be used in analisze of the floor e.g. by Linefollower vehicles.

MS-DIP/PLCC4 PCB, for SMD PLCC16 - PLCC84

The USB to 2.5G Ethernet converter is a compact and efficient tool that extends network functionality to devices lacking an RJ45 interface. With broad system compatibility and driverless operation, it is well-suited for mobile setups, single-board computers, embedded systems, and upgrading older hardware to higher network speeds.

4G LTE router ensuring a stable and fast connection to the Internet. It has 4 LAN ports, one WAN and an RS232/RS485 port. Supports Modbus RTU to TCP protocol. It offers mounting on a DIN rail and a metal housing with IP30 protection class. USR-G809-E

USB A-microB USB cable with a length of 1m, white-blue cable, flat, blue plugs illuminated with RGB diode

The 3.3V 3A Step-Down Converter Module is an efficient and compact solution for 3.3V voltage stabilization in various electronic applications.

GPS module with GNSS L76X receiver. It can receive data from GPS, BDS and QZSS systems. It uses the UART interface and offers an accuracy of up to 2.5 m. Waveshare L76X GPS HAT

LPS27HHW, MEMS pressure sensor: 260-1260 hPa absolute digital output barometer, CCLGA-10L

A 2xUART - Ethernet converter for bi-directional communication between devices equipped with TTL UART ports and Ethernet. It is visible in the system as a virtual COM port and configured via a web page or via AT commands. USR-TCP232-E2