Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-1000-R

Stereo audio amplifier with Bluetooth 5.0 communication. It can be powered with the voltage from 5 to 24 V and has two outputs with a power of 100 W. ZK-1002L

High-performance 4-in-1 electronic speed controller designed for FPV racing and freestyle drones. It supports 2–8S LiPo/LiHV batteries, provides up to 70 A continuous current per channel, and uses AM32 firmware with PWM frequency up to 128 kHz. The compact 20 × 20 mm mounting pattern makes it suitable for smaller FPV builds. SEQURE E70 G1 AM32

Module with a monitor of the operation of LiPo/Li-Ion batteries based on the MAX17048 system. It allows you to measure the voltage and state of charge of the battery. Adafruit 5580

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-1000-Y

Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-1000-O

Compact LoRa communication module for Meshtastic networks and custom radio applications, equipped with an ESP32-C6 microcontroller, SX1262 transceiver and 0.66" monochrome OLED display. It supports the 868-923 MHz frequency range and 2.4 GHz WiFi 6, and also includes a buzzer, programmable RGB LED, user button and HY2.0-4P expansion connector. M5Stack U202 Unit C6L

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-1000-G

Module with a light intensity sensor LTR-329. It offers a measuring range from 1 to 65535 lux and a 16-bit resolution. Communication takes place using I2C. Adafruit 5591

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0300-Y

USB - UART converter based on the CH9102F chip. Compatible with the voltage of 3.3 V and 5 V, it has been equipped with a USB type C connector. Adafruit 5568

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0500-BK

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0500-R

4-digit 7-segment 0.56 "LED display. Built-in HT16K33 controller allowing communication via I2C bus. Equipped with STEMMA QT connector. Adafruit 5603

Breakout board with the Bosch BME688 sensor for measuring temperature, relative humidity and atmospheric pressure as well as monitoring gases and indoor air quality, including VOCs. It communicates via I2C, features two Qwiic connectors and supports Arduino, MicroPython and Bosch BME AI-Studio. Soldered 333203

4-channel galvanic isolation module based on the Texas Instruments ISO6542F, designed for digital communication between electrically isolated circuits. It provides 2 channels in one direction and 2 in the opposite direction, data rates up to 50 Mbps per channel, and 400 VRMS functional isolation. Pololu 5745

Class D stereo sound amplifier based on the Texas Instruments TPA2016D2 circuit. It can work with 4 Ω speakers with power up to 2.8 W or 8 Ω with power up to 1.7 W in stereo mode. SparkFun DEV-20690

Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0500-O

Module with digital barometer BMP581. It enables pressure measurement in the range from 300 to 1250 hPa with an accuracy of ± 5 Pa and communicates via I2C. SparkFun SEN-20171

A module with a temperature and humidity sensor based on the AHT20 system. It communicates via the I2C interface. DFRobot SEN0527