C-Mount lens. 12 mm focal length, 39.2° (H), 29.4° (V), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN044

C-Mount lens. Focal length 16 mm, FoV 30.8° (H), 23.4° (V), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN045

C-Mount lens. 16 mm focal length, 24° (H) FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN046

A programmable desktop display based on the RP2350 microcontroller, featuring a 4-inch IPS touchscreen display with a resolution of 480 x 480 pixels. Built-in WiFi and Bluetooth allow it to download data from the internet and interact with other devices, serving as a calendar, weather station, or data panel. The device features RGB backlighting, a piezo speaker, a microSD card reader, and battery power for increased flexibility. Pimoroni PIM725

Ethernet network module with W5500 chip and PoE (Power over Ethernet) function. It communicates via the SPI interface, it has a built-in TCP/IP stack. DFRobot DFR0850

CS-Mount lens. Focal length 8 mm, FoV 50°, manual focus. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN038

Driver IC for Dual DC motor, SSOP24, Toshiba

A set of test leads 2x4 (4 signal and 4 GND) with a length of 23cm intended for logic analyzers Saleae to cooperate with a ready-made connector on a PCB (both ends terminated).

E-Ink display (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 2.9inch e-Paper (B)

Connection of the Segger emNet stack with the energy-saving physical layer system 10BASET1L Ethernet MAC-PHY ADIN1110. It enables the creation of applications with minimal energy consumption, fast data transmission and high reliability. Segger ADIN1110 (1/7/57)

16 MP camera with USB interface. Equipped with a Sony CMOS IMX298 sensor, a lens with a viewing angle of 60° and a microphone. Dedicated to be used with a computer. ArduCAM B0290

Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. It communicates via the I2C interface. DFRobot SEN0408

Module with a 3-axis LIS331HH accelerometer. The system has a user selectable measurement scale of ±6g/±12g/±24g. It communicates via the I2C interface. DFRobot SEN0407

A module based on the RP2040 microcontroller that lets you build your own two-player arcade controller, supporting up to 30 buttons and two joysticks. When connected via USB-C, it is automatically detected as a standard game controller on PC, Mac and Linux. With DuPont, Qw/ST connectors and support for backlit Plasma buttons, assembly and expansion are quick and solderless. Pimoroni PIM741

An acrylic diffuser for Pico 2W Unicorn tiles that effectively softens and disperses the intense light from LEDs. The translucent layer makes the pixels larger, blurrier, and much easier on the eyes, improving comfort during long-term use. The kit is ideal for desktop installations, wall mounts, and decorative projects. Pimoroni PIM714

Module with a bistable button and green LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-G

C-Mount lens. 8mm focal length, FoV 58.4° (H) x 44.6° (V), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN043

Laser sensor of air pollution with particles PM1,0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface. Planter PMSA003-C

The LY68L6400 64Mb SRAM memory is a modern device designed for high-performance embedded systems, IoT and portable devices, offering fast access to data at low power consumption thanks to SPI and QPI interfaces. High read and write speeds and a wide operating temperature range make it an ideal solution for various applications.