LED lighting system designed for the DJI Neo, equipped with 86 LEDs arranged around the drone body. The system offers seven colors and seven lighting effects, while two built-in 150 mAh batteries provide at least 50 minutes of operation in steady-on mode. VIFLY NeoHalo LED Strip for DJI Neo.

Compact locator buzzer designed for small FPV drones and RC models, equipped with its own 40 mAh LiPo battery. The audible signal reaches a volume of up to 100 dB, while the operating time after loss of main power is up to 7 hours. VIFLY Finder Mini

Lighting kit designed for the DJI Avata 2, consisting of a front light with Cree LEDs and two downward-facing lights. The front light provides a luminous flux of up to 400 lm, while the bottom lights illuminate the area beneath the drone to support the positioning system in dark environments. The total weight of the kit is 50 g. VIFLY Tactical Light for DJI Avata 2

Locator buzzer designed to help find FPV drones and RC aircraft after power or control signal loss. The built-in 80 mAh LiPo battery allows operation after the main battery is disconnected, while the sound level reaches up to 110 dB. VIFLY Finder 2.

Compact module designed for switching video between two FPV cameras in racing drones and RC airplanes. Control can be performed using a PWM signal or receivers supporting SBUS, IBUS and DSMX, without requiring configuration in Betaflight. VIFLY Cam Switcher

Wireless locator buzzer using a motion sensor to detect when a drone stops moving or crashes. The built-in 80 mAh LiPo battery enables independent operation, while the audible signal reaches up to 105 dB. Installation requires no wiring or soldering. VIFLY Beacon.

Compact anti-collision light designed to increase drone visibility during flight, equipped with white, red and green LEDs. It offers multiple lighting modes, a manufacturer-declared visibility range of over 3 miles and an operating time of up to 4 hours in strobe mode. The built-in 160 mAh battery is charged via USB Type-C. VIFLY Strobe

Electronic protection device designed to protect RC systems and drone electronics during initial power-up, diagnostics and power system testing. When a short circuit or the selected 1 A or 2 A current threshold is exceeded, the device cuts off the current flow, reducing the risk of component damage. VIFLY ShortSaver V2

Damping balls intended to reduce vibrations transferred to a camera gimbal in drones and multirotor models. The rubber construction and internal damping medium help dissipate vibration energy and reduce image interference during recording. The set includes four damping balls. Tarot TL10A09

This ESC is designed for advanced applications like drones, RC models, and high-powered vehicles, supporting 5- to 12-stage LiPo power supplies. Equipped with a 32-bit STM32G071 microcontroller and PWM support up to 128 kHz, it provides very smooth and precise motor control. It offers continuous current up to 200 A and burst current up to 250 A, and thanks to efficient MOSFETs and a CNC heatsink, it remains stable even under heavy loads.

Independent power module designed for GPS receivers used in FPV drones, allowing satellites to be acquired without powering up the flight controller or video transmission system. It supports 3.3 V and 5 V GPS receivers and provides an output current of up to 80 mA. The built-in locator function with a buzzer volume of up to 90 dB helps locate the model after loss of main power. VIFLY GPS-mate

Sequre M10-25Q is a compact GNSS module with a digital compass, optimized for use in drones and navigation systems. With support for multiple satellite systems and communication protocols, precise navigation, and flexible mounting options, the module offers a reliable solution for location- and orientation-focused projects.

The 7A 1-2S BLheli_S XSD7A Miniature Brushless Motor ESC Controller is a compact, high-performance device ideal for controlling brushless motors in small projects. Thanks to its low weight and solid power, it is suitable for drones, RC models and other applications requiring precise motor control.

Brushless motor driver module (ESC regulator) with current efficiency up to 20 A. Uses BLHeli_S software

High-current brushless electronic speed controller designed for FPV drones, multirotors, aircraft, boats and RC vehicles. It supports 2–8S LiPo batteries, provides up to 120 A continuous current and 150 A maximum current, while the STM32G071 processor with AM32 firmware enables fast and precise motor control. SEQURE 28120

High-performance 4-in-1 electronic speed controller designed for FPV racing and freestyle drones. It supports 2–8S LiPo/LiHV batteries, provides up to 70 A continuous current per channel and up to 150 A peak current. AM32 firmware and PWM frequency up to 128 kHz enable fast and smooth motor control. SEQURE E70 G2 AM32

<p>ESC brushless motor speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V) SEQURE SQESC 2670 ESCape32 + BEC.</p>

4-in-1 electronic speed controller designed for FPV racing and freestyle drones, supporting 2–6S LiPo and LiHV batteries and continuous current up to 65 A per channel. The 32-bit controller and AM32 firmware provide fast response, smooth motor control, and PWM frequencies up to 128 kHz. SEQURE Blueson A2

4-in-1 ESC for FPV drones, supporting 2-6S LiPo/LiHV voltage and up to 65A continuous current (120A peak current). Equipped with a 32-bit AT32F421 microcontroller and AM32 firmware, it provides smooth motor control with PWM in the 8-128 kHz range. It supports popular protocols such as DShot600, DShot300, Oneshot, Multishot, and PWM, and also offers telemetry functionality. SEQURE Blueson A1 6S 65A AM32

A 4-in-1 flight controller and ESC kit designed for FPV racing and freestyle drones, offering high performance and ultra-fast response times. The STM32H743-based flight controller with an ICM42688P gyroscope, 16MB Black Box, and 6 UART ports provides precise control and extensive configuration flexibility. The E70 G2 ESC with AM32 firmware supports 4-8S voltage, 70A continuous current (150A peak), and 16-128 kHz PWM frequency, ensuring smooth motor operation. The 30.5x30.5mm chassis also offers telemetry, DShot protocol support, and a stable 5V/10V power supply for video systems. SEQURE H743 V2 & E70 G2 Stack AM32