.png)
Category: Main categories
Subcategories
There are 22907 products.
The protection system for four Li-Ion cells with a voltage of 14.8 V. The module has the function of charging the cells, discharging and protecting against excessive discharge. The cells can be discharged with a continuous current of up to 18 A
Development board based on the RP2350 microcontroller combines a dual-core Arm Cortex-M33 processor with the W5100S Ethernet controller featuring a hardware TCP/IP stack. The board maintains compatibility with Raspberry Pi Pico 2 while adding a 10/100 Mb/s Ethernet interface with an RJ45 connector and optional Power over Ethernet support using the WIZPoE-P1 module. It is designed for IoT applications, industrial automation, network communication systems, and embedded devices requiring reliable wired Ethernet connectivity. WIZnet W5100S-EVB-Pico2
Adapter allows flexible connection between XT60-output chargers and devices with XT60, T‑BEC, or Futaba connectors. Designed for hobbyists and electronics users working with mixed power environments.
Two-channel DC motor driver with an operating voltage from 7 to 35 V and a maximum continuous current of 30 A. It can be controlled by an analog signal, PWM, UART, RC signal or by means of built-in buttons. Cytron MDDS30
Board compatible with Arduino, equipped with the ATmega32U4 microcontroller
Power cord with a length of 30 cm, terminated with an XT60 socket and a female DC Jack 5.5x2.5 mm socket
Cable (adapter) with a male DC 5.5 x 2.1 mm connector and alligator clips. It allows you to conveniently connect the device, e.g. to a power supply
Permanent cylindrical neodymium magnet with a diameter of 2 mm and a height of 1 mm. Set of 10 pcs
Blue LED (460nm) with 1W power equipped with a heat sink. Brightness approx. 30lm, viewing angle 120 degrees.
A pair of banana (angled) connectors dedicated to audio devices
Adapter from BNC male connector to terminal spring connector
Digital mono audio amplifier. It has one channel with a power of 30 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 8 to 26 V.
NC-519 8p is a durable panel-mount microphone connector, offering 8 signal channels, solder wire termination, and IP55 protection, making it a suitable solution for use in demanding environmental conditions.
Permanent cylindrical neodymium magnet with a diameter of 8 mm and a height of 3 mm. Set of 10 pcs
Waterproof sandpaper sheets designed for sanding paints, varnishes, fillers, and metal surfaces. The silicon carbide abrasive with P220 grit provides effective surface smoothing and material preparation for further finishing processes. The construction is suitable for both wet and dry sanding applications in workshops, paint shops, and renovation work. Yato YT-8406
5A car fuse is a key protection element for vehicle electronic systems, supplied in a set of 10, small in size and easy to replace
Dual H-Bridge motor driver board, 2A, 36V max, L298N, RoHS
Permanent cylindrical neodymium magnet with a diameter of 4 mm and a height of 3 mm. Set of 10 pcs
Flexible LED (LED filament) in white (warm), length 300 mm