- Out-of-Stock
Artillery Sidewinder X4 Plus - 3D printer with WiFi
ID: 1189203
5906623481347
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large workspace of 300 x 300 x 400 mm and uses a full metal hotend and a dual gear extruder. It allows printing at a speed of 500mm/s. Artillery Sidewinder X4 Plus
Description
The Artillery Sidewinder X4 is a 3D printer utilizing FFF/FDM printing technology. It features a large build volume of 300 x 300 x 400 mm. It has been equipped with numerous features to facilitate device operation, including a filament sensor, automatic bed leveling, power loss recovery, and a user-friendly touchscreen display. The mainboard is equipped with "silent" stepper motor drivers.
Automatic bed leveling system based on 81 points ensures precise bed alignment without consuming much time. The built-in sensor measures the distance from the bed at multiple points and, thanks to dynamic compensation, allows for easy device preparation. Meanwhile, the built-in filament sensor helps avoid failed prints due to filament depletion. The printer detects when the filament is running out and alerts the user.
A highly useful feature of the printer is the ability to resume printing after a power loss. This is particularly important for larger prints that take several hours. Power loss towards the end of a print often requires restarting the print job. The Sidewinder X4 allows you to resume interrupted prints, saving time and filament.
The design utilizes a dual Z-axis system, employing two trapezoidal screws with modified nuts. The dual gear extruder is responsible for filament feeding, transporting the material directly to the heating block, yielding good results, especially with flexible filaments. These solutions ensure stable operation, translating into better print quality.
The printer is controlled by a mainboard based on a 64-bit processor, ensuring efficient operation and high configuration flexibility for easy expansion. Thanks to the efficient control system, the printer reaches a speed of 500 mm/s and acceleration up to 12,000 mm/s². Good print quality at such speeds is ensured by innovative functions such as Input Shaping and Pressure Advance, which effectively minimize vibrations and shakes. Paired with a set of silent stepper motor drivers, it provides user convenience and generates minimal noise. For printer operation, users have access to a convenient touchscreen display.
The printer's construction is made of metal components, and the electronic part is hidden under the printer base. The automatic nozzle cleaning system ensures reliability and allows printing at temperatures up to 300°C. Its modularity makes the overall appearance aesthetic, and the assembly of the printer is quick and easy. Filament is placed on a specially prepared mount, and replacement is simple and intuitive. The printer supports a wide range of filaments: ABS, PLA, PVA, HIPS, as well as Nylon, ASA, and PC. It is compatible with most popular software. Print files can be read from an SD card or a computer via USB and WiFi.
Features
- Number of extruders: 1
- Extruder diameter: 0.4 mm
- Printing speed: up to 500 mm/s
- Supported filaments: ABS, PLA, HIPS, PVA, Wood, flexible filaments, TPU, PETG
- Filament diameter: 1.75 mm
- Print area: 300 x 300 x 400 mm
- Printing accuracy: ±0.1 mm
- Bed temperature: 110°C
- Nozzle temperature: up to 300°C
- 4.3" LCD touchscreen display
- Communication: WiFi, USB cable, SD card
- Mainboard with ARM 64-bit 1.5GHz processor
- Automatic nozzle cleaning system
- Automatic bed leveling
- Power supply: 300 W, 100–240 V, 50/60 Hz
- Dimensions: 510 x 490 x 680 mm
1189203
Data sheet
- Printing technology
- FDM (FFF)
- Extruder Quantity
- 1
- Type of extruder
- Direct
- Nozzle diameter
- 0,4 mm
- Max. extruder temperature
- 300°C
- Max. bed temperature
- 110°C
- Supported filaments
- ABS, PLA, PC, PETG, PLA-CF, PETG-CF
- Print Speed
- 500 mm/s
- Build volume
- 300x300x400mm
- Filament sensor
- Tak
- Bed level sensor
- Tak
- Built-in camera
- Nie
- Removable bed
- Nie
- Resume printing
- Tak
- Communication
- USB/WiFi
- Storage media
- SD card
- Length
- 500 mm
- Width
- 490 mm
- Height
- 680 mm
- Weight
- 15,5 kg
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
High-quality XF-ABS filament for 3D printer with a diameter of 3.0 mm. 2 kg of wire are wound on the spool.
Regular pricezł149.97zł129.78
24h
Available quantity: 1
Available
Easy PET-G filament in gray with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Gray
zł75.01
24h
Available quantity: 2
Available
Easy PET-G filament in orange with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Orange
zł75.01
24h
Available quantity: 2
Available
Easy PET-G filament in pure transparent with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Pure Transparent
zł75.01
24h
Available quantity: 2
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 261
Available
Other products in the same category (16)
A set containing a 8GB microSD card with a PYNQ image (for PYNQ-Z1) with an adapter. Digilent 240-075-1
Retired
No product available!
The DC motor driver allows you to control a motor with a voltage in the range of 6 to 28V, the motor can draw up to 60A. Controlled by PWM modeling, it can be used in robotics, small electric vehicles. Digilent 410-334-2
Retired
No product available!
Adapter with screw terminals for use with the OpenLogger data logger. Provides access to screw terminals to 8 analog inputs, 8 digital I/O, wave generator and power pins. Digilent 410-388
Retired
No product available!
Powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 32MBit (4MB)
Retired
No product available!
The Analog Training Board evaluation and training kit for designers interested in modern analog components from the Analog Devices offer
Retired
No product available!
Odroid N2 4 GB CoreELEC Edition is a ready-made kit that allows you to build a home entertainment center (media center), based on the ODROID N2 minicomputer with 4 GB of RAM.
Retired
No product available!
Industrial microSD UHS-1 memory card with a capacity of 8GB for ODROID N2 with pre-loaded Linux software.
Retired
No product available!
Panasonic Eneloop PRO R6/AA rechargeable batteries with a minimum capacity of 2500mAh and a voltage of 1.2V. The set contains four pieces sold in a reusable packaging. Panasonic BK-3HCDE/4LE
Retired
No product available!
Panasonic Eneloop PRO R03/AAA rechargeable batteries with a minimum capacity of 930mAh and a voltage of 1.2V. The set contains four pieces sold in a reusable packaging. Panasonic BK-4HCDE/4LE
Retired
No product available!
Panasonic Eneloop PRO R6/AA rechargeable batteries with a capacity of 2000mAh and a voltage of 1.2V. The set contains four pieces sold in a reusable packaging. Panasonic BK-3MCCE/4LE
Retired
No product available!
Panasonic Eneloop PRO R6/AA rechargeable batteries with a capacity of 2000mAh and a voltage of 1.2V. The set contains eight pieces sold in a reusable packaging. Panasonic BK-3MCCE/8LE
Retired
No product available!
Panasonic Eneloop R03/AAA rechargeable batteries with a capacity of 800mAh and a voltage of 1.2V. The set contains four pieces sold in a reusable packaging. Panasonic BK-4MCCE/4LE
Retired
No product available!
Panasonic Eneloop R03/AAA rechargeable batteries with a capacity of 800mAh and a voltage of 1.2V. The set contains eight pieces sold in a reusable packaging. Panasonic BK-4MCCE/8LE
Retired
No product available!
Universal Panasonic Eneloop R6/AA and R03/AAA battery box in blue. Panasonic BQ-CASEL/1E
Retired
No product available!
Panasonic Eneloop PRO R6/AA rechargeable batteries with a capacity of 2000mAh and a voltage of 1.2V. The set contains two pieces sold in a blister packaging. Panasonic BK-3MCCE/2B
Retired
No product available!
Panasonic Eneloop PRO R6/AA rechargeable batteries with a capacity of 2000mAh and a voltage of 1.2V. The set contains four pieces sold in a blister packaging and a plastic case. Panasonic BK-3MCCEC4B
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large workspace of 300 x 300 x 400 mm and uses a full metal hotend and a dual gear extruder. It allows printing at a speed of 500mm/s. Artillery Sidewinder X4 Plus