- Out-of-Stock
3pi Expansion Kit - Pololu 3pi robot expansion kit (PCB with cutouts) - black
ID: 195724
A set of spacers and connectors together with a PCB to expand the Pololu 3pi robot. Black PCB with cutouts for the display and connectors. Pololu 979
Description
A set of spacers and connectors together with PCBs for the expansion of the Pololu 3pi robot. Black PCB with cutouts for the display and connectors.
The expansion plate adapts to the chassis diameter of 3pi and is mounted just above the wheel tops with the four attached screws and spacers. Once assembled, the circuit board has electrical connections with the base, which allows you to connect your own electronics with a 3pi robot. These connections provide access to three voltages: VBAT (battery voltage), VCC (adjustable 5 V) and VBST (adjustable 9.25 V, which is supplied to the motors). In addition, the expansion board connects to the base's power button and battery charging port, allowing you to add your own power buttons and charging ports. The circuit board has cutouts that allow access to the LCD screen and power button, reset button and ISP programming header.
For users who need additional I/O lines or additional space for prototyping and do not need an LCD display, a better version of the expansion kit will be a board without cutouts.
Kit contains
- PCB in black with cutouts
- 1 x Extended male connector 2x7
- 2 x Extended 1x2 male connector
- 1 x 2x7 female connector
- 2 x 1x2 female connector
- 4 x Nylon spacers 22 mm
- 4 x Screw
- 4 x Nut
195724
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Kit to expand the Pololu 3pi robot to Pololu m3pi with a mbed socket board. Includes non-soldered PCB as well as necessary connectors and components for self-assembly. Pololu 2152
zł108.28
24h
Available quantity: 1
Available
Other products in the same category (16)
No product available!
No product available!
BTG Wandås, JP Nystuen, E. Eide, FM Gradstein
Delivery date unknown
No product available!
CBE02000406-YIY-R LCD display 4x20, 146x62,5mm, LED backlight (yellow-green), extended temperature range, RoHS
Retired
No product available!
No product available!
No product available!
Electronic metal caliper with remarkable accuracy to hundredths of a millimeter. It has a measuring range of 150 mm.
Retired
No product available!
No product available!
Assembled amplified power regulator of 230 VAC receivers. AVT1860 C
Retired
No product available!
No product available!
The camera is equipped with an ultra-sensitive Sony STARVIS IMX290 image sensor, which allows for recording in very low light conditions. It has an interchangeable M12 lens with an 88° viewing angle (HFOV), which provides a wide field of view. Thanks to advanced imaging technology, it is ideal for night conditions and minimal light. ArduCAM B0408
Retired
No product available!
This gearmotor is a powerful 12V brushed DC motor with a 131.25:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft.
Retired
No product available!
No product available!
Intenso Pendrive with a capacity of 32 GB equipped with a USB 2.0 interface. Maximum read speed: 28 MB / s, maximum write speed: 6 MB / s
Delivery date unknown
No product available!
Two-channel switch with WiFi that can control two circuits in a room. Allows each of the two channels to be switched on/off independently. Adaprox LKWSW201
Retired
No product available!
No product available!
A set of spacers and connectors together with a PCB to expand the Pololu 3pi robot. Black PCB with cutouts for the display and connectors. Pololu 979